DataCard 285 User Guide
2-18
Getting started
User’s Guide for the Magna™ Class Printer
Figure 2-17: Remove the overlay cartridge
3
Pull out on the cartridge lock to release the overlay cartridge
(step 2 in
(step 2 in
Figure 2-17
).
4
Pull the overlay cartridge out until the cartridge is out of the
printer (step 3 in
printer (step 3 in
Figure 2-17
).
♦
Loading overlay in the cartridge
After removing the overlay cartridge from the printer, remove the used
overlay material and load new overlay material.
overlay material and load new overlay material.
Load overlay in the cartridge
1
Place the overlay cartridge upside down on a level surface, such
as a table, with the wide side away from you.
as a table, with the wide side away from you.
2
Pull up firmly on the full take-up spool to remove it.
3
Remove the end of the supply material from the empty supply
spool if needed. Dispose of the used supply according to your
policy.
spool if needed. Dispose of the used supply according to your
policy.
1
2
3
MagnaUserGuide.book Page 18 Friday, May 5, 2000 1:09 PM