DataCard 285 User Guide
Maintaining the printer
4-7
User’s Guide for the Magna™ Class Printer
Figure 4-6: Clean the printing surface of the printhead
5
Close the swing arm, pressing it down until the push latch clicks
into place.
into place.
6
Connect the power cable to the power source and power on the
printer.
printer.
7
Print a card to verify the quality of printing. You can print a
Windows test page or a card using your card creation application.
If card quality is still inadequate, see
Windows test page or a card using your card creation application.
If card quality is still inadequate, see
♦
Cleaning the supply tracker
The supply tracker in the optional overlay module can become
slippery, which might cause messages to appear. Clean the supply
tracker weekly or when needed.
slippery, which might cause messages to appear. Clean the supply
tracker weekly or when needed.
Use a printer cleaning card to clean the supply tracker. You can also
use a duplex/overlay cleaning card; however, it is more difficult to
clean the full width of the supply tracker.
use a duplex/overlay cleaning card; however, it is more difficult to
clean the full width of the supply tracker.
MagnaUserGuide.book Page 7 Friday, May 5, 2000 1:09 PM