Cambridge SoundWorks 5.1 User Manual

Page of 20
5
The rear satellites may be installed
on their convenient floor stands. While
listening, the stands should be
positioned to the left and right of your
listening position (see Diagram G).
The Floor Stands are small enough
to be stowed underneath a desk
when not in use. See page 7 for floor
stand assembly instructions.
Larger work surfaces can
accommodate both front and
surround pairs of satellites on their
stands. Try the extreme corners of a
desk using the Desktop Stands (see
Diagram H).
Also, you may attach the rear
satellites under a desktop or at the
sides of a desk using the hook and
loop fasteners (see Diagram I).
 After you positioned the rear
satellites, use the test sound to
make sure each speaker can be
heard clearly.
The Subwoofer. The subwoofer’s
optimum position is on the floor
against the wall under the
computer desk. The nearer the
subwoofer is to the corner of the
room, the stronger its maximum
bass output will be. We strongly
H
I
J
recommend placing the subwoofer
on the floor (see Diagram J).
Leave at least 8 cm (3 inches) of
space between the subwoofer face
and a wall. Small objects in front
of, but not touching the subwoofer
(table legs, for instance) will have
no effect on its sound
If you have no available floor
space, the subwoofer can be placed
on a shelf, desktop or other sites,
but its maximum output will be
reduced. The subwoofer is mag-
netically shielded, allowing place-
ment near computers or monitors.