Cambridge SoundWorks 12 User Guide

• These optional filters can be

connected at either end of the
speaker wires of your Left and
Right Main speakers.
1) You can connect a filter’s
INPUT FROM AMP wires to
speaker outputs on your
receiver or amplifier, then
reconnect the main speaker wire
to the filter’s OUTPUT TO
SPEAKER leads with the wire
nuts supplied.
2) You can also connect a filter
at the speaker. Connect the
filter’s OUTPUT TO SPEAKER
leads to your speaker’s input
terminals, then reconnect the
main speaker wire to the filter’s
INPUT FROM AMP wires with
the wire nuts supplied.

• As with all speaker connections,

be sure to maintain consistency
with respect to the +  and —
terminals on the receiver and
those on the speakers, including
the 

BassCube subwoofer. The

connecting wires on the filters
are coded by the use of one
copper-colored conductor and
one silver.

Installing Low Cut Filters

Specifications

Amplifier Power:

75 watts

100 watts

(at 100 Hz, <.5% THD)

Driver Size:

10 inches

12 inches

Sensitivity for full output at 100hz.

Subwoofer level at max.
Low pass frequency set at 160 (LFE):

Line Level Input (mono), millivolts

95

110

Speaker Level Inputs (stereo), millivolts

250

300

Low Pass Filter Response:

24 dB/Octave

24 dB/Octave

Frequency Response, Hz (

±

3 dB):

LP setting
60 Hz

32-75 Hz

27-58 Hz

75 Hz

34-85 Hz

27-68 Hz

95 Hz

36-100 Hz

28-90 Hz

130 Hz

37-120 Hz

28-145 Hz

160 Hz

39-150 Hz

29-170 Hz

7