TRUE tac-14gs Specification Guide
STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right
Plan
3D
PLAN VIEW
KCL
ELEVATION
TAC-48 TFD025E
TFD025S
TFD025P
TFD0253
TAC-48
DESIGN
• Designed using the highest quality materials
and components to provide the user with colder
product temperatures and lower utility costs in
an attractive merchandiser that brilliantly displays
pre-packaged food and beverages.
product temperatures and lower utility costs in
an attractive merchandiser that brilliantly displays
pre-packaged food and beverages.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly (CFC
free) R404A refrigerant.
free) R404A refrigerant.
• Time-initiated, time-terminated off cycle defrost
system.
• Extra large evaporator coil and condenser
balanced with higher horsepower compressor;
maintains 33°F to 38°F (.5°C to 3.3°C) for the best
in food preservation.
maintains 33°F to 38°F (.5°C to 3.3°C) for the best
in food preservation.
• Sealed, cast iron, self-lubricating evaporator fan
motors.
• Bottom mounted condensing unit positioned
for easy maintenance.
• Exclusive reversing condenser fan motors. Fan
motors reverse during defrost off cycles to
help keep condenser coil free from dirt, dust
and debris. Keeping coils clean optimizes the
unit’s performance providing colder holding
temperatures and increased energy effi ciency.
Regularly scheduled thorough cleaning of coils
still recommended.
help keep condenser coil free from dirt, dust
and debris. Keeping coils clean optimizes the
unit’s performance providing colder holding
temperatures and increased energy effi ciency.
Regularly scheduled thorough cleaning of coils
still recommended.
CABINET CONSTRUCTION
• Exterior - durable and permanent
non-peel or chip white vinyl front and sides with
matching white aluminum back.
matching white aluminum back.
• Plexiglass lower front panel; durable and break
resistant.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel interior
fl oor and deck pans.
fl oor and deck pans.
• Insulation - entire cabinet structure is foamed-in-
place using high density, CFC free, polyurethane
insulation.
insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
corrosion protection inside and out.
• Frame rail fi tted with leg levelers.
• Illuminated exterior sign panel. Variety of sign
• Illuminated exterior sign panel. Variety of sign
options available.
SHELVING
• Four (4) adjustable, heavy duty PVC coated wire
shelves 44"L x 17"D (1118 mm x 432 mm). Four
(4) chrome plated shelf clips included per shelf.
(4) chrome plated shelf clips included per shelf.
• Shelf support pilasters made of same material as
cabinet interior; shelves are adjustable on
1
/
2
"
(13 mm) increments.
LIGHTING
• Fluorescent interior lighting, safety shielded.
• T8 bulbs and electronic ballast; provides better
• T8 bulbs and electronic ballast; provides better
illumination of product and increased energy
effi ciency.
effi ciency.
MODEL FEATURES
• Perforated interior back wall for more effi cient
airfl ow.
• Listed under NSF-7 for the storage and/or display
of packaged or bottled product.
ELECTRICAL
• Unit completely pre-wired at factory and ready
for fi nal connection to a
208-230V / 60 Hz single phase 15 amp dedicated
outlet. Cord and plug set included.
208-230V / 60 Hz single phase 15 amp dedicated
outlet. Cord and plug set included.
RECOMMENDED OPERATION CONDITIONS
• TAC models are designed to operate in an
environment where temperature and humidity
do not exceed 75°F (24°C) and 55% relative
humidity.
do not exceed 75°F (24°C) and 55% relative
humidity.
• Unit should not be installed near HVAC vents,
fans or doorways that will disrupt the air curtain
and compromise the function of the cabinet.
Unit should not be installed in direct sunlight.
and compromise the function of the cabinet.
Unit should not be installed in direct sunlight.
• Air curtain models will run most effi ciently when
completely loaded with product.
• Drain plumbing hookup recommended.
Condensate pan heater available if there is
no access to drain plumbing. Condensate pan
heater must be fi eld installed and requires a
separate 15 amp, 120V circuit.
no access to drain plumbing. Condensate pan
heater must be fi eld installed and requires a
separate 15 amp, 120V circuit.
OPTIONAL FEATURES/ACCESSORIES
❒ 230 - 240V / 50 Hz.
❒ 2
1
/
2
"(64mm) diameter castors.
❒ Variety of sign panels - see our website for the
latest color and sign offerings.
❒ Black exterior.
❒ Stainless steel exterior.
❒ Black interior liner with black shelves.
❒ Additional shelves.
❒ White cantilevered shelves.
❒ Stainless steel cantilevered shelves.
❒ Pricing strips.
❒ Night shade.
❒ Night cover.
❒ Vandal cover.
❒ White locking security cover. Standard with fl at
sign panel.
❒ Black/bronze locking security cover. Standard
with fl at sign panel.
❒ Silver locking security cover.
❒ Condensate pan heater. Must be fi eld installed
and requires a separate 15 amp, 120V circuit.
❒ Condensate pump.
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with 404A
expansion valve and requires R404A refrigerant).
Consult factory technical service department for
BTU information.
expansion valve and requires R404A refrigerant).
Consult factory technical service department for
BTU information.
RIGHT VIEW
208-230/60/1
NEMA-6-15R
NEMA-6-15R
30
1
/
16
"
(764 mm)
28
1
/
2
"
(724 mm)
48"
(1220 mm)
44
3
/
4
"
(1137 mm)
79
11
/
16
"
(2025 mm)
15
/
16
"
(24 mm)
80
5
/
8
"
(2048 mm)
10"
(254 mm)
Vertical Air Curtain:
Refrigerator
24
1
/
16
"
(612 mm)
32
"
(813 mm)