Alpine cva-1014 User Guide

You can change the Bass Frequency emphasis to
create your own tonal preference.

When the monitor is open, press bass engine.
BASS ENGINE mode is displayed in the monitor.

Press preset 1 to select the desired mode.

Press g or f to adjust the selected mode.
• Bass Level: -7~+7

You can emphasize or weaken the bass
frequency.

• Bass center frequency:

→ 60Hz ↔ 70Hz ↔ 80Hz ↔ 90Hz ↔ 100Hz ↔ 130Hz ↔ 150Hz ↔ 200Hz ←

Emphasizes the displayed Bass frequency
ranges.

• Bass Band Width (Q-Factor):

 

→ WIDE1 ↔ WIDE2 ↔ WIDE3 ↔ WIDE4 ←

     (Narrow)

←..............................→ (Wide)

Changes the displayed frequency's band width
to wide or narrow.

Press bass engine to return to normal mode.

• If no buttons are pressed within 10 seconds, the Bass

• Depending on the type of external audio processors

• The settings of the Bass  will be individually

When the monitor is open, press
TITLE 

 to select the titling mode. Then, press

and hold TITLE 

 for at least 2 seconds.

Within 10 seconds, press and hold -/J for at
least 2 seconds to activate the title scanning
mode.
The title in the display will blink.

Press g or f repeatedly until the title you
want to erase is displayed.

Press -/J to display “DELETE TITLE.”
Press -/J again within 10 seconds to erase the
selected title.

Press TITLE 

 to cancel the title erasing mode.

• You cannot erase CD-TEXT.

• When no title is input, “NO DATA” is displayed and

g

g

g

g

g

f

f

f

f

f

:

:

:

:

:/J

J

J

J

J

g

g

g

g

g

f

f

f

f

f

:

:

:

:

:/J

J

J

J

J