Alpine DVA-9861 Owner's Manual
22
-EN
01GB05DVA9861.fm
ALPINE DVA-9861 68-04123Z61-A (EN)
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
press MODE.
BBE
BASS ENGINE
SETUP
RETURN (OFF)
BBE
2
Press
or
to select the TREBLE (treble
Center frequency) control mode.
BASS
TREBLE
3
-1 Press SOURCE/POWER to select the desired treble
Centre frequency.
10.0kHz 12.5kHz 15.0kHz
7.5kHz
10.0kHz
Emphasizes the displayed Treble frequency ranges.
3
-2
*
2
Turn the Rotary encoder to select the desired
treble level (–7~+7).
treble level (–7~+7).
You can emphasize the treble level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Treble Level is still adjustable if
an audio processor with the Treble function is connected.
an audio processor with the Treble function is connected.
• This function is inoperable when DEFEAT is set to ON.
• While in the treble adjusting mode, BASS CONTROL adjusting mode
• While in the treble adjusting mode, BASS CONTROL adjusting mode
can be recalled by pressing
or
.
*
2
The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 21).
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 21).
Setting the BBE Mode
BBE makes vocals or instruments sound distinct regardless of the music
source. The FM radio, CD, and MP3, will be able to reproduce the
music clearly even in cars with a lot of road noise.
source. The FM radio, CD, and MP3, will be able to reproduce the
music clearly even in cars with a lot of road noise.
1
Press SOURCE/POWER to select the source to
which you want to apply BBE.
which you want to apply BBE.
2
Press MENU to select BBE mode, then press
MODE.
MODE.
BBE
BASS ENGINE
SETUP
RETURN (OFF)
BBE
3
Press
to set the BBE mode ON.
4
Turn the Rotary encoder to select your preferred
BBE level (1 to 3) or EFFECT OFF.
BBE level (1 to 3) or EFFECT OFF.
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
* To cancel BBE mode for all music sources, press
to select BBE
OFF in step 3.
• Each music source, such as FM radio, CD (included MP3/WMA) can
have its own BBE setting.
• This function is inoperable when DEFEAT is set to ON.
• There is no BBE mode for AM radio.
• When an external audio processor is connected, this setting cannot
• There is no BBE mode for AM radio.
• When an external audio processor is connected, this setting cannot
be made.
• If no operation is performed in 60 seconds, the unit returns to normal
mode.
Setting the Treble Center Frequency
Setting the Treble Level
BBE OFF*
BBE ON
(BBE 1 to 3, EFFECT OFF)
Displays the level indication
Bass Level is usually displayed. When BBE is activated,
the display changes according to the BBE setting.
the display changes according to the BBE setting.
01GB00DVA9861.book Page 22 Tuesday, December 6, 2005 3:41 PM