Hitachi dv-p303u Owner's Manual
33
NOTE
- Certain audio features of this product manufactured under a license from Desper Products, Inc., Spatializer® 3-D Stereo,
Spatializer N-2-2 and the circle-in-square are trademarks owned by Desper Products Inc.
- Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the doubleD symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories Inc. All rights reserved.
- DTS is a surround audio standard that offers 6 separate audio channels like the Dolby Digital. To hear DTS sound, the
DIGITAL AUDIO OUT must be connected to a DTS Compatible device.
Spatializer N-2-2 and the circle-in-square are trademarks owned by Desper Products Inc.
- Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the doubleD symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories Inc. All rights reserved.
- DTS is a surround audio standard that offers 6 separate audio channels like the Dolby Digital. To hear DTS sound, the
DIGITAL AUDIO OUT must be connected to a DTS Compatible device.
Troubleshooting Guide
Before requesting service (troubleshooting)
Problem
Action
Page
No operations can be
performed with
remote.
performed with
remote.
- Check the batteries in the remote. May need replacing.
- Operate the remote control at a distance of no more than 20 feet.
- Remove batteries and hold down one or more buttons for several minutes to drain the
microprocessor inside the remote to reset it. Reinstall batteries and try remote again.
- Operate the remote control at a distance of no more than 20 feet.
- Remove batteries and hold down one or more buttons for several minutes to drain the
microprocessor inside the remote to reset it. Reinstall batteries and try remote again.
P4
Disc does not play. - Ensure that the disc is installed with the label side facing up.
- Check the region number of the DVD.
- This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc.
Insert a DVD, a VIDEO-CD or a CD.
- This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc.
Insert a DVD, a VIDEO-CD or a CD.
P7
5.1 channel sound is
not being
reproduced.
not being
reproduced.
- 5.1 channel sound is reproduced only when the following conditions are met. :
1)The DVD player is connected with the proper amplifier
2)The disc is recorded with 5.1 channel sound.
- Check whether the disc being played has the "Dolby 5.1 ch" mark on the outside.
- Check if your audio system is connected and working properly.
1)The DVD player is connected with the proper amplifier
2)The disc is recorded with 5.1 channel sound.
- Check whether the disc being played has the "Dolby 5.1 ch" mark on the outside.
- Check if your audio system is connected and working properly.
P13-
14
14
The Ø icon appears
on screen.
on screen.
- The features or action cannot be completed at this time because:
1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g.,angles).
3. The feature is not available at the moment.
1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g.,angles).
3. The feature is not available at the moment.
P17-
22
P25-
29
22
P25-
29
Disc Menu doesn't
appear.
appear.
- Check if the disc has a Menu.
P24-
25
25
Playback mode
differs from the
Setup Menu
selection.
differs from the
Setup Menu
selection.
- Some of the functions selected in the Setup Menu may not work properly if the disc is not
encoded with the corresponding function.
encoded with the corresponding function.
P29-
35
35
The screen ratio
cannot be changed.
cannot be changed.
- The Screen Ratio is fixed on your DVDs.
P34-
35
35
No audio.
- Make sure you have selected the correct Digital Output in the Audio Options Menu
P33
Forgot parental level - Press power on from a cold start with no disc in the unit. Press the STOP and PLAY buttons
simultaneously on the front panel for three seconds. The Select Menu Language display will
appear. Select the desired language button. Press the SETUP button on the remote control to
select the Parental Mode. The Parental Mode is now unlocked as indicated on the display. Press
the DOWN button to select Parental. Press ENTER and the Password Check display will appear.
Enter the default password of 7777. You can now set your rating level and change your
password to a new number.
appear. Select the desired language button. Press the SETUP button on the remote control to
select the Parental Mode. The Parental Mode is now unlocked as indicated on the display. Press
the DOWN button to select Parental. Press ENTER and the Password Check display will appear.
Enter the default password of 7777. You can now set your rating level and change your
password to a new number.
P32
If you experience
other problems.
other problems.
- Go to the contents and find the section of the instruction book that contains the explanations
regarding the current problems. problem, and follow the procedure once again. If the problem
still cannot be solved, please contact your nearest authorized service center.
regarding the current problems. problem, and follow the procedure once again. If the problem
still cannot be solved, please contact your nearest authorized service center.