Hitachi c12fdh compound miter saw User Guide

10

sold separately

1

Extension Holder and Stopper (Code No. 323523)

2

Crown molding Vise Ass’y (Code No. 323545) (Include Crown molding Stopper (L))

3

Crown molding Stopper (L) (Code No. 323546)

4

Crown molding Stopper (R) (Code No. 323547)

Wood and aluminum sash.

Make the following preparations before operating the power tool:

1. Installation

11/32” (9mm) 
4 Holes

22-3/4” (578mm)

12-19/32”(320mm)

5/16" (8mm) bolt

Base

Work bench

5/16” (8mm) nut

1” (25mm) Thick bench

Fig. 4

Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.
Select 5/16” (8mm) diameter bolts suitable in length for the thickness of the work bench.
Bolt length should be at least 1-3/8" (35mm) plus the thickness of the work bench.
For example, use 2-11/32" (60mm) or larger bolts for a 1" (25mm) thick work bench.
The holder attached to the rear of the base helps stabilize the power tool.

Move

Adjust the holder 
until its bottom 
surface contacts the 
work bench surface.

Holder (B) 

6mm bolt

Holder (B) adjustment:
Loosen the 6mm bolt with the supplied 10mm box wrench.
Adjust the holder (B) until its bottom surface contacts the work
bench surface.
After adjustment, firmly tighten the 6mm bolt.

Fig. 5