Hitachi DZ-MV580A User Manual

English

123

Press A button in the recording pause status.

The DVD video camera/recorder will enter the 
playback mode, and the scene you have 
recorded last will be played back. (For “scene”, 
see P. 105 and “Terminology”,  P. 160.)
When playback is finished, the DVD video 
camera/recorder will enter the pause status at 
the last image on disc.
If the playback pause status continues for as 
long as 5 minutes, the DVD video camera/
recorder will automatically return to the 
recording pause status.

Press the C button.

Playback will stop, and recording pause status 
will be restored.

If the LCD monitor is open during playback of movie, 
playback sound will be heard from the speaker. Adjust 
the sound volume using the volume control buttons (

S

, 

R

).

To temporarily stop playback, press the 

A

 button. 

Press the 

A

 button again to restart playback.

Even if you stop playback midway and immediately start 
recording again, the new image will be recorded after the 
last scene on disc or card (the previous images will not 
be overwritten).

Image data edited on PC or certain types of image data 
may not appear on this DVD video camera/recorder.

Image data recorded on another camcorder may not be 
playable on this DVD video camera/recorder.

Depending on the amount of data to be played back, it 
may take some time for the playback image to appear.

Do not operate the power switch or remove the card 
while the ACCESS/PC or CARD ACCESS indicator is lit 
or blinking: Doing so may damage the card or the data 
on card.

Before You Begin

•  Insert a disc or card recorded on this DVD video camera/recorder (P. 49, 

50).

• Turn the DVD video camera/recorder on (P. 48).

Tilt up/down and to left/
right to select, and then 
press 

A

 to designate.