Hitachi d10vf 3 User Guide
English
19
HOW TO SELECT TIGHTENING TORQUE
Table 5
NOTE:
The selected content shown in Table 5 indicates the differences according to screw type,
screw size and material used.
The selected content shown in Table 5 indicates the differences according to screw type,
screw size and material used.
CAUTION:
●
While operating the Cordless driver drill, take care not to lock the motor.
If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.
If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.
●
Do not tighten too strongly as the screw heads will be damaged.
Cap
Tightening torque
Operation example
position
Approximately 9 in-lbs. (10 kg-cm)
Approximately 15 in-lbs. (17 kg-cm)
Approximately 23 in-lbs. (26 kg-cm)
Approximately 35 in-lbs. (40 kg-cm)
Approximately 43 in-lbs. (49 kg-cm)
Approximately 52 in-lbs. (60kg-cm)
High speed: approximately 78 in-lbs.
(90 kg-cm)(DS14DVB)
approximately 96 in-lbs.
(110 kg-cm)(DS18DVB)
Low speed: approximately 346 in-lbs.
(400 kg-cm)(DS14DVB)
approximately 400 in-lbs.
(460 kg-cm)(DS18DVB)
1
3
7
13
17
22
Machine screw
tightening.
Screw tightening for soft
wood material.
tightening.
Screw tightening for soft
wood material.
Screw tightening for
hard wood material.
hard wood material.
Thick screw tightening.
When used as a drill.
When used as a drill.