Hitachi ed-pj32 User Manual

Preparations

Connecting power supply

Connect the connector of the power cord to the AC inlet of the

projector.

Firmly plug the power cord's plug into the outlet.

Before connecting, make sure that the power switch is the OFF

position (pressed the side marked “O”).

►Please use extra caution when connecting the power cord as

incorrect or faulty connections may result in ﬁre and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

your dealer to newly get correct one.

• Only plug the power cord into an outlet rated for use with the power cord's

speciﬁed voltage range.

• Never modify the power cord. Never attempt to defeat the ground connection

of the three-pronged plug.

• The power outlet should be close to the projector and easily accessible.

• Do not touch the power cord with a wet hand.

• Check that the connecting portion of the power cord is clean (with no dust)

before using. Use a soft and dry cloth to clean the power plug.

• Insert the power plug into a power outlet ﬁrmly. Avoid using a loose, unsound

outlet or contact failure.

WARNING

Power switch

AC inlet
Connector of the power cord