Hitachi ed-pj32 User Manual

35

ENGLISH

Multifunctional settings

Using the buttons ▲/▼ switches the progress mode.

TV  FILM  TURN OFF

     
• This function is performed only for an interlaced signal of a VIDEO 

input, an S-VIDEO input or a component video input of 525i (480i) 

or 625i (576i) signal.
• When the TV or FILM is selected, the screen image will be sharp. 

The FILM mode can also be used for the 2-3 Pull-Down conversion 

system (not be used for the 2-2 Pull-Down system). But these may 

cause a certain defect (for example, jagged line) of the picture for a 

quick moving object. In such a case, please select the TURN OFF, 

even though the screen image may lose the sharp.

Choosing a mode of MY MEMORY using the buttons ▲/▼ and then 

pressing the button ► or the ENTER button performs each function.

LOAD1  LOAD2  LOAD3  LOAD4

SAVE4 SAVE3  SAVE2  SAVE1

This projector has 4 numbered memories for adjustment data.

Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data 

on the memory whose number corresponds to the command’s 

number, and adjusts the picture automatically depending on the 

data.

Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current 

adjustment data on the memory whose number corresponds with 

the command’s number.

• The current adjustment data of the items in the PICTURE menu is 

stored. Except for the adjustment data in the CUSTOM modes for 

the GAMMA (33) and COLOR TEMP items. (34)