Alpine DVA-5205 User Manual

12

DVD

CD

Video CD

DVD

Video CD

ENT

CHG

UP

+10

0

9

LIST

GO TO

TITLE

DISP

MENU

SET

∼

、

SOURCE

SLOW

:

:

:

:

:

Playback starts.

On DVDs and video CDs with playback control
(PBC), menu screens may appear automati-
cally.  If this happens, perform the operation
described below to start playback.

Note: For many discs, the menu screen can also

be displayed by pressing “MENU” or “TITLE”
(for at least 2 seconds).

SOURCE

SLOW

• With some DVDs, certain operations

are disabled.  Such operations are
not possible on such DVDs.

• The DVD functions described in this

manual are not supported by all
DVDs. See the individual DVDs
instructions for details on the
features supported.

• Fingerprints on a disc may

adversely affect playback. If a
problem occurs, remove the disc
and check for fingerprints on the
playback side. Clean the disc if
necessary.

• When using the remote control, be

careful to press one button at time.
Pressing multiple buttons at the
same time may cause erroneous
operation.

• Even if you switch the power or the

Ignition Key to OFF during playback
or change the video source,
playback will continue from the point
where it stopped when the power is
turned ON again.
If the disc is removed or the Reset
switch is pressed, the play position
memory is released.

• Operation may not be accepted

depending on the type of disc and
the playback conditions.  At such a
time the following mark is displayed
on the screen: