Delfield 6000xl-g Specification Guide

Exterior: Top and bottom are constructed of 24-gauge 

galvanized steel.  Exterior sides are 0.032 aluminum.  Front 

housing is 22-gauge stainless steel.

Doors: Unit is provided with hinged glass front door(s).  

Doors are provided with magnetic gaskets, self-closing, 

edgemount hinges; and quick grip long length door handle(s).

Doors are field reversible with no drilling required.

Interior: Liner is constructed of seamless, one piece ABS 

material with 15 molded shelf supports spaced 3.00” (7.6cm) 

apart.  Three epoxy coated wire shelves, rated at 250 lb. load 

capacity each, are provided per section.  Shelf supports are 

also capable of holding two 12” x 20” pans (by others) or one 

18” x 26” pan (by others) per level.  Liner comes with a limited 

lifetime warranty.

Units are completely insulated with a minimum of 2.00” 

(5.08cm) high density foamed in place polyurethane.

Interior is lit by one 15-watt fluorescent light on one door 

models, one 40-watt fluorescent lights on two door models 

and three 15-watt fluorescent lights on three door models.  

Lights are located outside of the food zone.  Fluorescent 

lights are operated with a manual on/off switch.

Refrigeration system: All components are mounted to 

the exterior cabinet ceiling, outside the food zone and are 

assembled as one piece and can be removed as one piece.  

Environmentally friendly R404A refrigerant is used.  System 

has the capability of maintaining between 27˚F and 40˚F in 

heavy use food service operations.  Refrigerant is metered 

using a highly responsive thermostatic expansion valve.  

System is controlled using Delfield’s ACT-Advanced Control 

Technology electronic temperature control, which provides 

improved pull down times, reducing compressor cycling and 

longer compressor life with lower energy consumption.  

Control system uses adaptive defrost to assure evaporator 

coil is free of ice and operating at optimum efficiency.   

Evaporator condensate is eliminated using an energy efficient 

hot gas system.

Others: Unit is supplied standard with a 10’ cord and plug, 

attached.  

Units are standard with legs.  Legs are constructed of painted 

metal and are 6” high with 1” adjustability to compensate 

for installation location factors. Shipped loose for field 

installation.

Specifications

Standard Features

Options & 
Accessories

•

Stainless steel front shroud

•

Aluminum sides

•

Seamless, Delrite® ABS interior liner

•

Top mounted refrigeration system

•

High performance Delflow refrigeration,
designed to maintain 27˚F to 40˚F

•

Easy to adjust epoxy shelves (three per
section)

•

Easy to read digital thermometer with
visual high/low temp alarms

•

10’ cord and plug attached

•

Edgemount door hinges

•

All doors are fully field rehingable

•

Environmentally friendly R404a refrigerant

•

One year parts and labor, 5 year compressor
warranty, limited lifetime liner warranty

•

Accepts 18” x 26” sheet pans

•

Standard glass door handles

•

6” adjustable legs (field installed)

•

Self closing doors with stay open feature at
120˚

Models

6000XL

Glass Door Reach-in Refrigerators

6000XL: Glass D

oor R

each-in R

efr

igerat

or

o 

Extra shelves

o 

Non standard hinging

• 6025XL-G

Single section Full height doors

• 6051XL-G

Two section Full height doors

• 6076XL-G

Three section Full height doors

• 6025XL-GR

Remote Full height doors

• 6051XL-GR

Remote Full height doors

• 6076XL-GR

Remote Full height doors

• 6025XL-GH

Single section Half height door

• 6051XL-GH

Two section Half height door

• 6076XL-GH

Three section Half height door

• 6025XL-GHR

Remote Half height door

• 6051XL-GHR

Remote Half height door

• 6076XL-GHR

Remote Half height door