Delfield f18dc82 Specification Guide
Short Form Specifications
Exterior top is one-piece, 16-gauge stainless steel, with integral 2.12”
(5.4cm) high square nosing on front. Top has a mechanically cooled refrig-
erated raised rail at rear with openings to accommodate 1/6 size pans.
Pans and adapter bars are provided by others. Pans are recessed .38” in
the front for easy access and 3.38” in the rear for proper cooling (see cross
section). Rail interior is 22-gauge stainless steel. Raised rail openings have
20-gauge stainless steel hinged removable lids. Unit is equipped with sep-
arate expansion valve and on/off switch for refrigerated rail. Temperature
in top opening to maintain 33°F (1°C) to 41°F (5°C), at 86°F ambient room
temperature, meeting NSF7 requirements.
Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are
finished with 18-gauge galvanized steel.
Base Interior is 22-gauge stainless steel back and bottom. Base interior
ends and door frames are thermoformed ABS plastic. Base is insulated
with 1.5” (3.8cm) high density foamed in place polyurethane.
Door(s) have a 22-gauge stainless steel exterior front, with thermoformed
ABS plastic interior liner, black recessed handle and snap in magnetic gas-
ket which is easily replaceable. Each interior door section has (1) remov-
able epoxy coated wire shelf.
Base has a blower coil assembly with expansion valve located behind
door mullion. Base is equipped with independently controlled thermostat
and solenoid valve. On/off switch for unit is located behind the hinged
panel.
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit is sup-
plied with 8' cord and plug.
Refrigeration System Components — HFC-404A.
(5.4cm) high square nosing on front. Top has a mechanically cooled refrig-
erated raised rail at rear with openings to accommodate 1/6 size pans.
Pans and adapter bars are provided by others. Pans are recessed .38” in
the front for easy access and 3.38” in the rear for proper cooling (see cross
section). Rail interior is 22-gauge stainless steel. Raised rail openings have
20-gauge stainless steel hinged removable lids. Unit is equipped with sep-
arate expansion valve and on/off switch for refrigerated rail. Temperature
in top opening to maintain 33°F (1°C) to 41°F (5°C), at 86°F ambient room
temperature, meeting NSF7 requirements.
Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are
finished with 18-gauge galvanized steel.
Base Interior is 22-gauge stainless steel back and bottom. Base interior
ends and door frames are thermoformed ABS plastic. Base is insulated
with 1.5” (3.8cm) high density foamed in place polyurethane.
Door(s) have a 22-gauge stainless steel exterior front, with thermoformed
ABS plastic interior liner, black recessed handle and snap in magnetic gas-
ket which is easily replaceable. Each interior door section has (1) remov-
able epoxy coated wire shelf.
Base has a blower coil assembly with expansion valve located behind
door mullion. Base is equipped with independently controlled thermostat
and solenoid valve. On/off switch for unit is located behind the hinged
panel.
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit is sup-
plied with 8' cord and plug.
Refrigeration System Components — HFC-404A.
Optional Accessories & Modifications
906A
Stainless steel end
505H
Stainless steel back
505F
Laminate facing (full front)
906E
Laminate end
905A
Laminate back
1030A Cutting board (Sanalite or composite)
109
109
Condensate evaporator (1 per coil) for base
107F
Tray rack
102
Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
E-(3) 19” in lieu of one door
F-(3) 27” in lieu of one door
G-(3) 32” in lieu of one door
H-(2) 24” in lieu of one door
J-(3) 24” in lieu of one door
108
Locks
120F
Cold pan drain
213
*220V/50 cycle
* Inclusion of this option will alter the
electrical specifications of the unit
Model F18DC82
31.5” (80cm) Deep Self-Contained Quick Glance Rail
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
F18DC