Delfield f18sr31a Specification Guide
Short Form Specifications
Exterior Top is constructed of one piece 16-gauge stainless steel,
with integral 2.12” (5.4cm) square nosing on front and 4” (10.2cm)
high by 2” (5.1cm) thick backsplash on rear. Top has an opening for
use with 1/6 size pans. Pan and adapter bars supplied by others. Pans
are recessed 3” (7.6cm) or 2” (5.1cm) and rest on adjustable pan sup-
ports. Pan opening to have a removable 20-gauge stainless steel cover.
Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C),
with pans recessed 3” (7.6cm), at 86°F ambient room temperature,
meeting NSF7 requirements.
with integral 2.12” (5.4cm) square nosing on front and 4” (10.2cm)
high by 2” (5.1cm) thick backsplash on rear. Top has an opening for
use with 1/6 size pans. Pan and adapter bars supplied by others. Pans
are recessed 3” (7.6cm) or 2” (5.1cm) and rest on adjustable pan sup-
ports. Pan opening to have a removable 20-gauge stainless steel cover.
Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C),
with pans recessed 3” (7.6cm), at 86°F ambient room temperature,
meeting NSF7 requirements.
Exterior back and bottom of base are constructed of 24-gauge galva-
nized steel. Exterior ends are constructed of 18-gauge galvanized
steel.
nized steel. Exterior ends are constructed of 18-gauge galvanized
steel.
Unit has a stainless steel plate shelf 8.4”[21.3cm] high above the
doors.
doors.
Base interior has a 22-gauge stainless steel back and bottom.
Interior ends and door frames are thermoformed ABS plastic. Base
is insulated with 1.5” (3.8cm) of high density foamed in place
polyurethane.
Interior ends and door frames are thermoformed ABS plastic. Base
is insulated with 1.5” (3.8cm) of high density foamed in place
polyurethane.
Door(s) are constructed with ABS plastic interior liner and 22-
gauge stainless steel exterior front. Door(s) have a black recessed
handle and a snap in magnetic gasket which is easily replaceable.
gauge stainless steel exterior front. Door(s) have a black recessed
handle and a snap in magnetic gasket which is easily replaceable.
Base is furnished with a blower coil especially made to fit behind
door mullion. Blower coil housing to enclose refrigeration lines,
evaporator coil, expansion valve and fans and includes thermostat
and solenoid valve.
door mullion. Blower coil housing to enclose refrigeration lines,
evaporator coil, expansion valve and fans and includes thermostat
and solenoid valve.
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Refrigeration System Components — HFC-404A.
Electrical connections are 115 volts, 60 Hertz, single phase. Unit
must be hard wired.
must be hard wired.
Optional Accessories & Modifications
906A
Stainless steel end
505H
Stainless steel back
505F
Laminate facing (full front)
906E
Laminate end
905A
Laminate back
1030F
Cutting board (Sanalite or composite)
109
Condensate evaporator (1 per coil) for base
107F
Tray rack
102
Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
108
Locks
120F
Cold pan drain
213
*220V/50 cycle
*Inclusion of this option will alter the
electrical specifications of the unit
Model F18SR52A
31.5” (80cm) Deep Remote Refrigerated Salad Top Tables
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
F18SR
®