Delfield f5sc48n Specification Guide

Page of 2
F5 24” DEEP SEE THROUGH SELF-CONT
AINED DROP INS REFRIGERA
TED DISPLA
Y CASES
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
F5 Serview Drop In
24” Deep See Through Self-Contained Refrigerated Display Cases
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date____________________
F5SC48N
SPECIFICATIONS
Display section exterior sides are made of 18-
gauge stainless steel.  Exterior display section top 
to be 22-gauge galvanized metal.  Interior sides 
are made of .095” thick ABS plastic with molded 
shelf supports.  The interior bottom is constructed 
with stainless steel for long lasting durability.  
Display section is fully insulated with high density 
polyurethane foam between the interior and exte-
rior.  Four adjustable epoxy coated wire shelves 
are provided for the display section.  An on/off 
switch for the display section light(s) is located at 
the right end of the front facing, above the display 
section doors.
Display case refrigeration system consists of a 
full-length top mounted coil with multiple fans 
circulating the air throughout the cabinet utilizing 
a thermostatic control.  An ABS plastic drip pan is placed 
below the coil with a clear drain hose for running the 
condensation to the lower base mechanical section.
Front of the display section is equipped with two sliding 
and removable self-closing .50” thick argon filled, 
low-e glass doors with a warm edge spacer.  The vertical 
outsides of each door tuck into an extruded channel 
running vertically up each side.  Front and rear nosing 
to be 20-gauge stainless steel.  
Self-contained models have a pre-wired condensing 
unit housed in a 16-gauge cage hanging form the units 
exterior bottom.  Cage also is supplied with an 8’ cord 
and plug and electrical junction box.   Electrical connec-
tions are 115V-60H-1PH.
Refrigeration system components are HFC-404A.  
Display cabinet blower coil assembly shall have a 
coated evaporator coil and fans.  Interior refriger-
ated base cabinet and display section to maintain 36 
to 40 degree temperatures at 100-degree ambient 
room temperature.  
Back has (1) .62” thick argon filled, low-e glass 
panel.
MODELS:
 
F5SC48N 
24” Deep Self-Contained Drop In
 
Display Section
 
F5SC72N 
24” Deep Self-Contained Drop In
 
Display Section
STANDARD FEATURES
•  Display exterior sides are made of 18-gauge stainless 
steel
•  ABS plastic interior sides with molded shelf supports
•  (4) adjustable epoxy coated wire shelves
•  On/off switch for the display section light(s)
•  Top mount coil with multiple fans circulating the air 
throughout the cabinet
•  Display section runs off a thermostatic control
•  Sliding and removable self-closing .50” thick argon 
filled, low-E, warm edge insert, thermopane glass doors 
with left and right vertical gasket
•  High density polyurethane foam throughout unit
•  Three adjustable epoxy coated shelves for each door
•  Environmentally friendly HFC-404A refrigerant
 
OPTIONS AND ACCESSORIES
 
48” shelf (48” long units only)
 
72” shelf (72” long units only)
 
220 volt/50 cycle - inclusion of this option will 
alter specifications