Delfield mhpt1-g Specification Guide

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date____________________

Exterior: Cabinet front and shroud shall be 22-gauge 

stainless steel. Exterior sides shall be aluminum.  Facing 
of shroud shall be easily removable without the use of 
tools.
Cabinet interior shall be anodized aluminum. Bottom 
& top of liner shall be die-stamped to provide 
radius corners and a recessed bottom. Base shall be 
fully insulated with high-density foamed in place 
polyurethane.
Interior shall have three epoxy-coated wire shelves per 
door section. Shelf support pilasters shall be heavy-duty 
with shelves adjustable at 1.0” (2.5 cm) increments. 
Units are mounted on 6” (15.24 cm) legs.

Doors: Solid doors shall have a 22-gauge stainless steel 

exterior & anodized aluminum interior liner. Doors shall 
be fully insulated with high density foamed in place 
polyurethane. Each door shall have two self-closing, 
cam-lift style hinges. Doors shall be easily removable 

without use of tools. Door gaskets shall be magnetic snap-in 
style to allow simple replacement. Door handles shall be 
recessed.

Glass doors are constructed with a combination of extruded 
aluminum & PVC, and are provided with magnetic gaskets.  
Doors will have

 

self-closing hinges and continuous handle 

along vertical dimension of door(s).
• Please specify right or left hand hinging at time of order.

Mechanical controls shall be located behind a removable 
shroud facing. 

Dual Voltage Models Only: Electrical connections shall 

be 115/208-240 volt, 60 hertz, single phase, and must be 
hard-wired to the junction box located on top of the unit.

Heating Assembly:  Cabinets to be designed to 

maintain temperature up to 200ºF.  Helical shaped, 
tubular fin heating element.  High speed blower to 
provide uniform airflow in cabinet.  Removable/
replaceable heating system.  No exposed elements inside 
cabinet. Fan and heating elements service accessible 
without tools.  Temperature to be controlled by an 
adjustable electronic thermostat equipped with an analog 
display.   On/off switch in front. 

 

MHPT1-S 

Single section 

 

MHPT2-S 

Two section  

 

Solid full height door 

 

Solid full height doors

 

MHPT1-GS 

Single section 

 

MHPT2-GS 

Two section

 

Half glass/half solid door 

 

Half glass/half solid doors

 

MHPT1-G 

Single section 

 

MHPT2-G 

Two section

 

Full height glass door 

 

Full height glass doors 

•  Shroud removes without tools, for easy condenser 

maintenance

•  Built in door locks
•  Durable stainless steel doors and shroud, for lasting good 

looks

•  New high-density foam insulation cuts energy costs
•  Big, easy grip handles are easy to find, don’t intrude into 

kitchen traffic

•  Attractive aluminum side panels are easy to clean and 

corrosion resistant

•  Heavy-duty hinges with stay open feature
•  Refrigeration system is located outside the food zone, more 

space for product storage

•  Mini watt door heaters eliminate condensation with 

minimal energy cost

•  Easy to read dial thermometer
•  Tri seal door gaskets lower energy costs with a unique 

insulating design

•  Chrome shelves
•  Aluminum interior stands up to food acids without 

corroding

•  Lots of interior storage space for the money
•  Rugged metal legs, adjustable to compensate for 

uneven floors

OPTIONS AND ACCESSORIES
 

Stainless steel exterior sides

 

Stainless steel interior

 

Stainless steel kick plate

 

Door and end laminate

 

Stainless steel exterior back

 

Digital thermometer

 

TXV

 

Chrome Shelves

 

Tray Slides

 

220/50/1 electrical

 

Electronic control

 

Stainless steel legs

 

Casters