Delfield SAR2S-SLS Specification Guide

Project  __________________________

Item ____________________________

Quantity  _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfi eld.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfi eld.com

Approval _________________

Date ____________________

Exterior: Cabinet exterior sides, front and shroud 

shall be 22-gauge, corrosion resistant stainless steel.  
Upper shroud shall be hinged, with stay-open feature 
to provide easy access to refrigeration system.

Interior: Cabinet interior shall be 22-gauge, corrosion 

resistant stainless steel (SS models) or heavy gauge 
aluminum (SA models).  Bottom and top surfaces are 
die stamped to provide radius corners and recessed 
fl oor.  Three chrome plated wire shelves are provided 
per section.  Shelves rest on clips which are adjustable 
in 1” increments on stainless steel pilasters affi xed to 
the cabinet interior.  Pilasters are removable without 
tools for cleaning.   An air duct is mounted to the 
ceiling assuring low velocity, even air movement 
throughout the cabinet interior.

Doors: 

Solid Sliding. Exterior and interior shall be 22-gauge 

corrosion resistant stainless steel.

Glass Sliding. Double thermopane glass set in high impact 

black plastic frame.

Doors are set in tracks for easy movement.  Spring action 
assures self closing.  Gasket seals both ends of doors.  Doors 
are removable for cleaning.

Refrigeration system:  All components are mounted to 

the exterior cabinet ceiling, outside the food zone and are 
assembled as one piece and can be removed as one piece.  
Environmentally friendly R404A refrigerant is used.  System 
has the capability of maintaining between 27˚F and 40˚F in 
heavy use food service operations.  Refrigerant is metered 
using a highly responsive thermostatic expansion valve.  

System is controlled using Delfi eld’s ACT-Advanced 
Control Technology electronic temperature control, which 
provides improved pull down times, reducing compressor 
cycling and longer compressor life with lower energy 
consumption.  

Control system uses adaptive defrost to assure 
evaporator coil is free of ice and operating at optimum 
effi ciency.  Evaporator condensate is eliminated using an 
energy effi cient hot gas system.

Electrical: Standard electrical connections shall be 115V, 

60Hz, single phase.  A 10’ cord and plug is supplied 
attached to a junction box mounted on the exterior top 
of the cabinet.

❑ 

SSR2-SLS 

2 section stainless interior 

 

sliding solid full height doors

❑ 

SSR2-SLSH 

2 section stainless interior 

 

sliding solid half height doors

❑ 

SSR2-SLG 

2 section stainless interior 

 

sliding glass full height doors

❑ 

SSR2-SLGH 

2 section stainless interior 

 

sliding glass half height doors

❑ 

SAR2-SLS 

2 section aluminum interior 

 

sliding solid full height doors

❑ 

SAR2-SLSH 

2 section aluminum interior 

 

sliding solid half height doors

❑ 

SAR2-SLG 

2 section aluminum interior 

 

sliding glass full height doors

❑ 

SAR2-SLGH 

2 section aluminum interior 

 

sliding glass half height doors

•  Stainless steel interior and exterior (SS)
•  Stainless steel exterior, aluminum interior (SA)
•  Exterior digital thermometer
•  Easy to use electronic control
•  Three chrome plated wire shelves per section
•  10’ attached cord and plug standard on 115V units
•  6” adjustable stainless steel legs
•  Energy savings door heater switch
•  Flourescent lights with on/off switch 
 

(Glass door units only)

•  Two year parts & labor warranty

OPTIONS AND ACCESSORIES
❑ 

Additional shelves

❑ 

Tray slides

❑ 

Stainless steel back

❑ 

Laminate on front, sides and back

❑ 

Bottom mount electrical

❑ 

Stainless steel banking strip

❑ 

Heat shield end

❑ 

Stainless steel kick plate

❑ 

Laminate kick plate

❑ 

4” stainless steel utility base

❑ 

Alarm control display

❑ 

220-50-1 electrical

❑ 

220-60-1 electrical

❑ 

Security package

SSR2-SLG