Delfield SADBR1-SH Specification Guide

Project  __________________________

Item ____________________________

Quantity  _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfi eld.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfi eld.com

Approval _________________

Date ____________________

Exterior: Top and bottom are constructed of 

heavy gauge galvinized steel.  Sides and upper 
shroud are heavy gauge stainless steel.

Interior: Liner is heavy gauge, corrosion 

resistant, stainless steel (SS)

 or heavy gauge 

aluminum (SA models)

.  Two wire shelves per 

section are supported by stainless steel shelf clips 
which are placed in stainless steel pilasters and 
are adjustable on 1” centers.  Shelves are rated 
at 250lb. load capacity each.

Doors:  Unit is provided with two half height 

hinged doors.  Doors are provided with locks; 
magnetic door gasket, easily removable without 
tools; cam lift, self closing, edge mount door 
hinges.

Refrigeration Systems:  Each compartment has 

its own separate refrigeration system.  Condensing 
units are located on top of the cabinet, outside the 
food zone, behind the removable upper shroud.  
Evaporator coils are located inside the cabinet 
mounted to the interior ceiling of each compartment.  
Defrost is automatic.  Condensate travels down a 
tube in the cabinet side wall to a recepticle mounted 
to the exterior bottom of the cabinet where it 
evaporates with the aid of an electric heater.  Each 
compartment’s temperature is individually monitored 
and controlled.  Two exterior digital themometers 
monitor temperature.  Refrigerator compartment 
maintains temperature between 33˚F and 41˚F.  
Freezer compartment maintains temperature between 
+0˚F and -5˚F.

Miscellaneous:  Unit comes with one 10’ cord 

and plug with single point connection to all 
cabinet and refrigeration system electronics.  Each 
compartment is illuminated by a door switch 
activated, 25 watt, incondescent light mounted to 
the interior ceiling.  Unit comes standard with four, 
adjustable stainless steel legs, mounted in the fi eld.  
Unit is standard with a two year parts, two year 
labor warranty and additional three year parts  
warranty only on the compressor part.

❑ 

SSDTR1-SH 

Refrigerator top/freezer bottom, stainless interior 

❑ 

SADTR1-SH 

Refrigerator top/freezer bottom, aluminum interior 

❑ 

SSDBR1-SH 

Freezer top/refrigerator bottom, stainless interior

❑ 

SADBR1-SH  Freezer top/refrigerator bottom, aluminum interior

•  Stainless steel exterior and interior (SS)
•  Tri-seal door gaskets
•  Stainless steel exterior, aluminum interior (SA)
•  Chrome plated shelves - two per section
•   Two seperate, top mounted condensing units, one for 

each compartment

•   Interior, ceiling mounted evaporator coil in each 

compartment

•   Automatic condensate removal
•   High density polyurethane foam insulation
•   Heavy duty hinges with stay open feature
•  Easy to read exterior digital themometers
•   Built in door  locks with heavy duty strikes
•  Recessed door handles
•  Easy access “fl ip up” shroud
•  Tough ABS interior door liners
•  6” adjustable stainless steel legs
•  Stainless steel breaker strips
•  Two year parts & labor warranty

OPTIONS AND ACCESSORIES
❑ 

Laminate ends

❑ 

Laminate doors & shroud

❑ 

Extra shelves

❑ 

Stainless steel wall trim

❑ 

Security package

❑ 

220-50-1 electrical

❑ 

220-60-1 electrical

❑ 

Casters

❑ 

Tray slides

❑ 

One glass door/one solid door confi guration

❑ 

Stainless steel door liner

❑ 

Bottom mount electrical

❑ 

Heat shield end

❑ 

Stainless steel back