Delfield se-ice1 Specification Guide

Project ________________________________________

Item Number ___________________________________

Quantity ____________Date_______________________

Approval ______________________________________

Delfield reserves the right to make changes in design or specifications without prior notice.  ©2004 The Delfield Company.  All rights reserved.  Printed in the U.S.A.

Exterior Body: Open frame construction with 16-gauge stainless steel corners: 
18-gauge stainless steel full bottom shelf and stainless steel C channel front and sides 
for optional accent panels.

Exterior Top: Constructed of 16-gauge stainless steel, welded, ground and polished 
into one integral unit.  Top is fabricated with square exterior corners.  Top has die-
stamped openings, with hinged removable lids. Lids are constructed of stainless steel 
and have a rubber gasket seal. 

Freezer Compartment: A water-tight inner liner constructed of 22-gauge stainless 
steel, with radius corners and 1.5” (3.8cm) of polyurethane insulation.

Refrigeration: Copper refrigeration coils are attached to outside of inner liner.  Unit 
is refrigerated by self-contained, 115 volt, 60 hertz, single phase hermetically sealed 
condensing unit with thermostatic control.  Unit is wired with a 3-wire, grounded, 
maximum 10’ (3m) 120 volt cord and plug.

Casters: Units are mounted on 5” (12.7cm) diameter swivel casters with non-marking 
polyolefin tires and plate brakes.  Overall height of caster assembly is 6” (15.2cm).

Optional Accessories and Modifications
SE-A 

10" stainless steel fold-down tray slide

8” polyethylene fold-down cutting board

8” stainless steel fold down work shelf

SE-F 

Interlock device

SE-Q 

115/15A outlet

SE-U 

14"x29" stainless steel end drop shelf

SE-V 

Adjustable stainless steel leg