Delfield sprd36p-36n Specification Guide

Project  __________________________

Item ____________________________

Quantity  _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date ____________________

❑ 

SPRD36P-36N 

Pass through refrigerated display case, 

 

36” total length, 35” depth 

❑ 

SPRD36P-50N 

Pass through refrigerated display case, 

 

50” total length, 35” depth

❑ 

Pass through refrigerated display case, 

 

50” total length, 35” depth

❑ 

Pass through refrigerated display case, 

 

60” total length, 35” depth

❑ 

Pass through refrigerated display case, 

 

74” total length, 35” depth

❑ 

Pass through refrigerated display case, 

 

74” total length, 35” depth

For actual display case dimentions see back

•  Display exterior sides are made of 18-gauge stainless steel

•  ABS plastic interior sides with molded shelf supports

•  (4) adjustable epoxy coated wire shelves

•  On/off switch for the display section light(s)

•  Top mount coil with multiple fans circulating the air throughout the 

cabinet

•  Display section runs off a thermostatic control

•  Sliding and removable self-closing .5” thick argon filled, low-E, 

warm edge insert, thermopane glass doors with left and right 

vertical gasket

•  Door locks standard
Base Section

•  14-gauge stainless steel top standard

•  34” counter height, 30” depth

•  18-gauge stainless steel exterior body

•  9’ long cord and plug are supplied standard

•  R404A refrigerant

•   Standard on 5” diameter polyurethane casters

•  Stainless steel fully retractable interlock provided as standard

•  A wide selection of laminate colors available at no additional 

charge

•  One-year parts and 90 day labor standard warranty.  Additional 

warranties available.

OPTIONS AND ACCESSORIES
❑ 

16”x30” Stainless steel drop tray shelf

❑ 

Stainless steel cash self

❑

  Tray slides

 

• V-style

 

• Tubular bar

❑

  2” Wire basket (13.25”x20.5”x2.5”)

❑

  4” Wire basket (13.25”x20.5”x4.75”)

❑

  Decal package

❑

  Extra shelf 36”

❑

  Extra shelf 50”

❑

  Extra shelf 60”

❑

  Extra shelf 72”

❑

  220 volt, 50 cycle electrical system*

*Inclusion of these options will alter the electrical 

specifications of the unit

Exterior: Exterior body is constructed of 18-gauge 

stainless steel side panels or 18-gauge galvanized 
reinforced laminate panels. 14-gauge galvanized 
bottom.  All exterior side panels are reinforced with 
overlapping corners and are welded in place.  All 
insert cutouts are reinforced with 14-gauge galvanized 
channel supports.
Exterior top is constructed of 14-gauge stainless steel, 
welded, ground and polished into one integral unit.  
Top is fabricated with square exterior corners with 
fully hemmed nosing on all sides.  Stainless steel fully 
retractable interlocks are installed on opposing corners 
and locks units into a complete serving system.

Display Case: Display section exterior sides are 

made of 18-gauge stainless steel.  Exterior display 
section top to be 22-gauge galvanized metal.  Interior 
sides are made of .095” thick ABS plastic with molded 
shelf supports.  The interior bottom is constructed with 
stainless steel for long lasting durability.  Display section 
is fully insulated with high density polyurethane foam 

between the interior and exterior.  Four adjustable 
epoxy coated wire shelves are provided for the display 
section.  An on/off switch for the display section light(s) 
is located at the right end of the front facing, above the 
display section doors.
Display case refrigeration system consists of a full-
length top mounted coil with multiple fans circulating 
the air throughout the cabinet utilizing a thermostatic 
control.  An ABS plastic drip pan is placed below the coil 
with a clear drain hose for running the condensation to 
the lower base mechanical section.
Front of the display section is equipped with two 
sliding and removable self-closing .5” thick argon 
filled, low-e glass doors with a warm edge spacer.  The 
vertical outsides of each door tuck into an extruded 
channel running vertically up each side.  Locking doors 
are standard.  Front and rear nosing to be 20-gauge 
stainless steel.  
Display cabinet to maintain 36to 40 degree 
temperatures at 100 degree ambient room 
temperature.

Refrigeration:  Refrigeration system uses HFC-404A 

refrigerant and has a self-contained 115 volt, 60 Hertz, 
single phase hermetically sealed condensing unit.  
Self-contained models have a pre-wired condensing unit 
housed in a machine compartment, standard on right, 
with an easy removable louver panel for quick access.  
Machine compartment also is supplied with an 9’ cord 
and plug and electrical junction box.

Casters: Unit is mounted on 5” (12.7cm) diameter 

swivel polyurethane casters with non-marking tires 
and plate brakes.  Casters are bolted directly to the 
14-gauge bottom of the base.  Overall height of caster 
assembly is 6.00” (15.2cm).

Styling: Units are standard with 18-gauge stainless 

steel exterior sides.  Laminate is an option available 
at no additional charge.  Decal packages are also 
available.