Canon mp610 User Manual

Before Using the Machine

Prepare to load paper.

(1) Open the Sheet Feeder Cover and pull out the 

Paper Support.
Put your finger in the rounded indent of the 
Paper Support and pull it out until it stops.

(2) Open the Paper Output Tray.

Put your finger in the indent on the top of the 
Paper Output Tray and open it gently.

(3) Open the Output Tray Extension.
(4) Press the Paper Feed Switch so that the 

Rear Tray lamp (A) lights.

Load the paper.

(1) Load the paper in the Rear Tray with the print 

side facing UP.

(2) Align the paper stack against the Cover Guide 

on the right side of the Paper Support.

(3) Pinch the Paper Guide and slide it against the 

left side of the paper stack.

Specify the page size and media type settings according to the loaded paper.

You can also select the paper source with the printer 

driver.
For details, refer to the PC Printing Guide on-screen 

manual.

Make sure that the Cover Guide is set upright 

when you load paper in the Rear Tray.

Do not slide the Paper Guide too hard. Paper 

may not be fed properly.

z

When performing copy direct printing without using a computer, select the size and type of the 

loaded paper in Page size and Media type in each mode. For details on settings in each menu, 

see “Setting Items” on page 24 and page 45.

z

When using the machine connected to a computer, select the size and type of the loaded paper 

in Page Size (or Paper Size) and Media Type in the printer driver.
For details on printer driver settings, see “Printing with Windows” on page 36 or “Printing with 

Macintosh” on page 37.

(A)

(4)

(3) (2)

(1)

Do not load higher than the Load Limit 
Mark (B).

(B)

(3)

(1) (2)