LXE 1280 Reference Guide
Platform Menu
89
E-SW-LDSPLUSRG-G
LDS Plus Reference Guide
Com1StopBits – COM1 Stop Bits
Function
The Com1StopBits parameter specifies the stop bits setting for communications port number 1
(COM1).
(COM1).
Options
Valid options:
1, 2
Default setting:
1
Access Level
Parameter may only be modified by a user with an access level of 2 or 3.
Com1HalfDuplex – COM1 Half Duplex
Function
The Com1HalfDuplex parameter determines whether or not characters received on
communications port number 1 (COM1) are echoed back to COM1. When Echo is selected, the
characters received on COM1 are echoed back out to COM1. When No Echo is selected, the
characters are not echoed.
communications port number 1 (COM1) are echoed back to COM1. When Echo is selected, the
characters received on COM1 are echoed back out to COM1. When No Echo is selected, the
characters are not echoed.
Options
Valid options:
Echo, No Echo
Default setting:
No Echo
Access Level
Parameter may only be modified by a user with an access level of 2 or 3.
Com1Xon – COM1 Software Flow Control
Function
The Com1Xon parameter enables or disables the use of software flow control (XON/XOFF) for
communications port number 1 (COM1).
communications port number 1 (COM1).
Options
Valid options:
Disable, Enable
Default setting:
Disable
Access Level
Parameter may only be modified by a user with an access level of 2 or 3.