Celestion ftr12-4080hdx Specification Guide
Professional Loudspeakers
Your Global Driver Solutions Partner
Celestion International Ltd, Claydon Business Park, Great Blakenham, Ipswich IP6 ONL, UK
+44 (0)1473 835300 sales@celestion.com www.celestionprofessional.com
+44 (0)1473 835300 sales@celestion.com www.celestionprofessional.com
Celestion adopts a progressive policy and reserve the right to alter drive unit specifications and/or appearance without prior notice 08/05
FTR12-4080HDX
• 12" ferrite subwoofer offers 1000Wrms (AES) continuous power
handling and a frequency response of 47Hz-3kHz
• 4" high temperature Inside/Outside voice coil efficiently
dissipates heat, preventing sensitivity loss through thermal
compression
compression
• Double suspension and a “multi-roll” surround provide
exceptional linearity at extremes of cone excursion
• Intelligent heat management in both chassis and magnet
assembly design further minimizes distortion
70
90
110
30
50
70
Frequency Response and Impedance Curves
General Specifications
Nominal diameter (mm/in) .......................................305/12
Power Rating (AES, W rms).........................................1000
Nominal impedance (
Power Rating (AES, W rms).........................................1000
Nominal impedance (
Ω
) ...................................................8
Voice coil diameter (mm/in) .................................101.6/4.0
Magnet type .............................................................Ferrite
Chassis type ...............................................Cast aluminium
Sensitivity (dB) ...............................................................93
Frequency range (Hz) ............................................47-3000
Coil material..................................................Round copper
Former material..................................................Glass fibre
Cone material....................Glass loaded paper with weather
Magnet type .............................................................Ferrite
Chassis type ...............................................Cast aluminium
Sensitivity (dB) ...............................................................93
Frequency range (Hz) ............................................47-3000
Coil material..................................................Round copper
Former material..................................................Glass fibre
Cone material....................Glass loaded paper with weather
........................................................resistant impregnation
Surround material............................................Cloth-sealed
Suspension..............................................................Double
Xmax (mm/in) .......................................................8.0/0.32
Gap depth (mm/in)..............................................10.0/0.39
Voice coil winding width (mm/in)..........................25.0/0.98
Suspension..............................................................Double
Xmax (mm/in) .......................................................8.0/0.32
Gap depth (mm/in)..............................................10.0/0.39
Voice coil winding width (mm/in)..........................25.0/0.98
Small Signal Parameters
D (m/in)............................................................0.26/10.24
F
F
s
(Hz) ........................................................................61.2
M
md
(g/oz)....................................................101.764/3.59
M
air
(g/oz) .........................................................6.92/0.244
Q
ms
..........................................................................2.228
Q
es
...........................................................................0.446
Q
ts
...........................................................................0.372
R
e
(
Ω
) ........................................................................6.05
V
as
(lt/ft
3
) ........................................................24.79/0.875
BI (Tm) .....................................................................23.81
C
C
ms
(mm/N) ..............................................................0.062
R
ms
(kg/s) ...............................................................18.768
L
e
(mH).......................................................................1.92
Mounting Information
Overall diameter (mm/in) ......................................313/12.3
Overall depth (mm/in).............................................158/6.2
Cut-out diameter (mm/in) .....................................282/11.1
Mounting slot dimensions (mm/in).........10 x 6.5/0.4 x 0.26
Number of mounting slots ................................................8
Mounting slot PCD range (mm/in) .........291-301/11.7-11.9
Unit weight (kg/lb).................................................9.6/21.1
Overall depth (mm/in).............................................158/6.2
Cut-out diameter (mm/in) .....................................282/11.1
Mounting slot dimensions (mm/in).........10 x 6.5/0.4 x 0.26
Number of mounting slots ................................................8
Mounting slot PCD range (mm/in) .........291-301/11.7-11.9
Unit weight (kg/lb).................................................9.6/21.1
Packed Dimensions & Weight
Single pack size W x D x H (mm/in) ...........350 x 350 x 180
............................................................./13.8 x 13.8 x 7.1
Single pack weight (kg/lb) ...................................11.4/25.1
Multipack (36) size W x D x H (mm/in) ..........1210 x 1050 x
Multipack (36) size W x D x H (mm/in) ..........1210 x 1050 x
.....................................................980/47.6 x 41.3 x 35.4
Multipack (36) weight (kg/lb) .................................380/836
Unit conditioned prior to measurement.
Measured - 1W @ 1m, 2
π