Canon LBP-1000 User Guide
151
7
Correcting Poor Print Quality
Correcting Poor Print Quality
When text is too light or dark ...
Follow this procedure to adjust the print density. Adjust the print density if printed text
on your page is too light or too dark.
on your page is too light or too dark.
Print density can be adjusted within a range of 0 (lightest) to 15 (darkest).
1
Press
Go
to take the printer off-line. The On Line indicator goes off.
2
Press
Menu
to display the first menu title (PCL MENU) in the top line.
3
Press
Menu
repeatedly until CONFIG MENU appears.
4
Press
Item
to display the first menu item (JAM RECOVERY) in the bottom line.
5
Press
Item
repeatedly until DENSITY appears.
6
Increase the density for a darker print. Press
Value
to increase the number. The highest
number you can set for the density is 15.
-or-
Decrease the density for a lighter print. Hold down
Shift
and press
Value
to decrease the number. The lowest number you can set for the density is 0.
7
When the setting you require is displayed, press
Enter
.
8
Press
Go
to put the printer on-line. The On Line light comes on and the printer is ready
for use.