Canon LBP-1000 User Guide
40
Printing from the Multi-Purpose Tray
Printing single sheets manually
1
Check the tray and be sure that it is empty.
2
Set the paper source selection for manual feed in the application’s printer setup.
3
Start the print job with your software application.
4
A message prompts you to load the media size specified. For example:
At this time, the Alarm indicator will light up to warn you of it.
5
Place a sheet of the media in the tray.
6
Press
Go
to print the page.
7
If you are printing more than one page, you will be prompted to load the next sheet.
Load the sheet and press
Load the sheet and press
Go
to continue printing.
• Load the same size paper in the tray as is specified in the MPTSIZE setting.
• However, if you send a print job specifying a different paper size to the
• However, if you send a print job specifying a different paper size to the
MPTSIZE setting, you must ensure the required paper size is loaded in the
tray. The size specified in the data takes priority over the MPTSIZE setting
– this becomes the new MPTSIZE default setting.
tray. The size specified in the data takes priority over the MPTSIZE setting
– this becomes the new MPTSIZE default setting.
LOAD LEGAL
IN MANUAL
IN MANUAL