Canon LBP-1000 User Guide
45
2
Printing Envelopes with the Multi-Purpose Tray
Using the control panel to print envelopes
Envelope printing can be selected by using the Configuration feature from within your
software application program or from the printer control panel.
software application program or from the printer control panel.
If you cannot select envelope printing from the printer driver and software application,
follow the procedure below to set the printer to print on envelopes only.
1
Press
Go
to take the printer off-line. At this time, make sure the On Line indicator is
off. The READY message will change to PAUSED.
2
Press
Menu
to display the first menu (PCL MENU) in the top line.
3
Press
Item
until you see ORIENTATION in the top line.
4
To select landscape orientation, press
Value
until you see ORIENTATION=
LANDSCAPE in the bottom line and press
Enter
.
5
Press
Menu
until you see FEEDER MENU in the top line.
6
Press
Item
. The message FEED=XXXXXX will appear in the bottom line.
7
Press
Value
until you see MPT displayed. Press
Enter
to select it.
8
Because the tray does not have a paper size sensor, you must set the paper size. Press
Item
until you see MPTSIZE in the bottom line.
9
Press
Value
until you see the envelope size that you want, for example COM10, and
press
Enter
.
10
Press
Go
to put the printer back on-line. Then start printing the envelopes from your
software application.
11
When you are finished using the tray, close it.
To avoid damage to the tray, close it when not in use.