Canon LBP-1000 User Guide
60
The Standard Printing Environment Settings
PT.SIZE (point size) is the measured vertical height of a typeface. There are 72 points
per inch, so a 36-point font is half an inch high, measured from the top of the
per inch, so a 36-point font is half an inch high, measured from the top of the
uppercase letters to the tail of the letter
y
.
When the selected font is a bitmap or fixed spacing font, this item will not
appear for selection.
appear for selection.
12.00
The printer font source is set for 12-point.
4.00 to 999.75
To increase the number in increments of 0.25, press
Value
. To
quickly scroll through the numbers in increments of 1.00, hold
down
down
Value
.
To decrease the number in decrements of 0.25, press
Shift
and
Value
, or press and hold
Shift
and
Value
to quickly scroll
backwards in decrements of 1.00.
PITCH appears only if the font source you selected with FNTSRC (font source) and
FONTNUM (font number) above is a scalable font in a fixed pitch typeface. Use this
item to set the pitch of the font. Pitch is measured as the number of equally spaced
item to set the pitch of the font. Pitch is measured as the number of equally spaced
characters per inch.
10.00
The selected pitch is 10 characters per inch.
0.44 to 99.99
To increase the number in increments of 0.01, press
Value
. To
quickly scroll through the numbers in increments of 1.00, press and
hold down
Value
.
To decrease the number in decrements of 0.01, press
Shift
and
Value
, or press and hold
Shift
and
Value
to quickly scroll
backwards in decrements of 1.00.
PITCH is only displayed when the font is Scaled Fixed Space.
PCL MENU
PITCH=10.00
PITCH=10.00
*
PCL MENU
PT.SIZE=12.00
PT.SIZE=12.00
*