LXE vx3x Reference Guide

Wavelink Avalanche Enabler Configuration 

115 

E-EQ-VX3XRG-D 

VX3X Reference Guide 

The Wavelink Avalanche Enabler installation file is loaded on the mobile device by LXE; 
however, the device is not configured to launch the installation file automatically. The installation 
application must be run manually the first time Avalanche is used. Following installation, the 
Enabler will by default be an auto-launch application. This behavior can be modified by accessing 
the Avalanche Update Settings panel through the Enabler Interface.  

•  Doubletap the Avalanche Enabler CAB file in the System folder. The filename is 

LXE_VX3X_ENABLER.CAB. 

•  Warm boot the mobile device. 

To remove the LXE Avalanche Enabler from a Windows CE mobile device: 

•  Delete the Avalanche folder located in the System folder. 
•  Warm boot the mobile device. 

The Avalanche folder cannot be deleted while the Enabler is running. See Stop the Enabler 
Service. If sharing errors occur while attempting to delete the Avalanche folder, warm boot the 
mobile device, immediately delete the Avalanche folder, and then perform another warm boot. 

To stop the Enabler from monitoring for updates from the Avalanche MC Console: 

1.  Open the Enabler Settings Panels by tapping the Avalanche icon on the desktop. 

2.  Select File | Settings. Enter the password. 

3.  Select the Startup/Shutdown tab. 

4.  Select the “Do not monitor or launch Enabler” parameter to prevent automatic monitoring 

upon startup. 

5.  Select Stop Monitoring for an immediate shutdown of all enabler update functionality upon 

exiting the user interface. 

6.  Click the OK button to save the changes. 

7.  Reboot the device if necessary. 

There are three methods by which the Enabler on an LXE device can communicate with the 
Mobile Device Server running on the host machine. 

•  Wired via a serial cable between the Mobile Device Server and the LXE device.