LXE vx3x Reference Guide
Summit Radio
187
E-EQ-VX3XRG-D
VX3X Reference Guide
EAP-FAST
To use EAP-FAST, make sure the following profile options are used.
• Enter the SSID of the Access Point assigned to this profile
• Set EAP Type to EAP-FAST
• Set Encryption to WPA TKIP
• Set Auth Type to Open
• Set EAP Type to EAP-FAST
• Set Encryption to WPA TKIP
• Set Auth Type to Open
The SCU supports EAP-FAST with automatic or manual PAC provisioning. With automatic PAC
provisioning, the user credentials, whether entered on the saved credentials screen or the sign on
screen, are sent to the RADIUS server. The RADIUS server must have auto provisioning enabled
to send the PAC provisioning credentials to the client device. Please refer to the “LXE Security
Primer” for more information on the RADIUS server configuration.
provisioning, the user credentials, whether entered on the saved credentials screen or the sign on
screen, are sent to the RADIUS server. The RADIUS server must have auto provisioning enabled
to send the PAC provisioning credentials to the client device. Please refer to the “LXE Security
Primer” for more information on the RADIUS server configuration.
Figure 5-25 EAP-FAST Configuration
For automatic PAC provisioning, once a username/password is authenticated, the PAC
information is stored on the computer. The same username/password must be used to authenticate
each time. See the note on the next page for more details.
information is stored on the computer. The same username/password must be used to authenticate
each time. See the note on the next page for more details.
For manual PAC provisioning, the PAC filename and Password must be entered.
Please review “Sign-On vs. Stored Credentials”, earlier in this chapter.