LXE vx3x Reference Guide
18
Bluetooth
VX3X Reference Guide
E-EQ-VX3XRG-D
VX3X with Label
If the VX3X has a Bluetooth address barcode label attached, follow these steps:
1. Scan the Bluetooth address barcode label, attached to the VX3X, with the LXE Bluetooth
mobile scanner.
2. If this is the first time the Bluetooth scanner has scanned the VX3X Bluetooth label, the
devices are paired. See section titled “Bluetooth Beep and LED Indications”. If the devices do
not pair successfully, go to the next step.
not pair successfully, go to the next step.
3. Open the LXEZ Pairing panel [Start | Settings | Control Panel | Bluetooth].
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Double tap the stylus on the Bluetooth scanner. The right-mouse-click menu appears.
6. Select Pair as Scanner to pair the VX3X with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled “Bluetooth Beep and LED Indications”.
flashes. Refer to the following section titled “Bluetooth Beep and LED Indications”.
Note:
After scanning the VX3X Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
Bluetooth device, the devices are currently paired.