LXE vx3x Reference Guide
30
Power Modes
VX3X Reference Guide
E-EQ-VX3XRG-D
Power Modes
The VX3X has several distinct power modes.
• On Mode – When the VX3X is attached to either vehicle 12-80 VDC or an external
power supply and the power button is pressed, the VX3X is in the On mode. In this
mode, the keypad, touchscreen and any attached peripherals such as a scanner
function normally. The display remains on until the backlight timer (if enabled)
expires.
mode, the keypad, touchscreen and any attached peripherals such as a scanner
function normally. The display remains on until the backlight timer (if enabled)
expires.
• User Idle Mode – If the Display Backlight Timer is enabled (see the Display section
in the Windows CE Control panel), the VX3X enters User Idle Mode when the
display backlight timer expires without any Primary Event (see below) to reset the
timer. The VX3X exits User Idle Mode with any Primary Event. The keypress or
screen touch that exits User Idle Mode is sent to the operating system. The VX3X
then transitions to On Mode.
display backlight timer expires without any Primary Event (see below) to reset the
timer. The VX3X exits User Idle Mode with any Primary Event. The keypress or
screen touch that exits User Idle Mode is sent to the operating system. The VX3X
then transitions to On Mode.
Primary Events
Any key on the keypad
COM1 activity
Stylus touch on the touchscreen
Scanner activity
Power button tap
USB client connection
Bluetooth device reconnect / disconnect message
• Suspend Mode - The Suspend mode is entered when the Power Button is tapped.
Some devices may include a Start | Suspend option to enter Suspend mode. In
Suspend mode, the display is off. Any of the events listed below wakes the VX3X
from Suspend and returns the VX3X to On mode. The keypress or screen touch
that exits Suspend Mode is not sent to the operating system.
Suspend mode, the display is off. Any of the events listed below wakes the VX3X
from Suspend and returns the VX3X to On mode. The keypress or screen touch
that exits Suspend Mode is not sent to the operating system.
Any of the following primary events will wake the unit and reset the display /
display backlight timers:
display backlight timers:
Any key on the keypad
Stylus touch on the touchscreen
Power button tap
Bluetooth device reconnect / disconnect message
Stylus touch on the touchscreen
Power button tap
Bluetooth device reconnect / disconnect message
• Off Mode – The VX3X is off when it is not connected to a power source. However,
an internal Real Time Clock (RTC) powered by an internal battery maintains the
date and time while the VX3X is off.
date and time while the VX3X is off.