LXE vx3plus Reference Guide
Backup VX3Plus Files using ActiveSync
113
E-EQ-VX3PLUSRG-A
VX3Plus Reference Guide
Create a Communication Option
1. On the VX3Plus, select Start | Settings | Control Panel | Network and Dialup
Connections. A window is displayed showing the existing connections.
2. Assuming the one you want does not exist, double-click Make New Connection.
3. Give the new connection an appropriate name. Tap the Direct Connection radio button. Tap
the Next button.
4. From the popup menu, choose the port you want to connect to. Only the available ports are
shown.
5. Tap the Configure... button.
6. Under the Port Settings tab, choose the appropriate baud rate. Data bits, parity, and stop bits
remain at 8, none, and 1, respectively.
7. Under the Call Options tab, be sure to turn off Wait for dial tone, since a direct connection
will not have a dial tone. Set the timeout parameter (default is 90 seconds). Tap OK.
8. TCP/IP Settings should not need to change from defaults. Tap the Finish button to create the
new connection.
9. Close the Remote Networking window.
10. To activate the new connection select Start | Settings | Control Panel | PC Connection and
tap the Change button.
11. Select the new connection. Tap OK twice.
12. Close the Control Panel window.
13. Connect the desktop PC to the VX3Plus with the appropriate cable.
14. Tap the desktop Connect icon to test the new connection.
You can activate the connection by double-clicking on the specific connection icon in the Remote
Networking window, but this will only start an RAS (Remote Access Services) session, and does
not start ActiveSync properly.
Networking window, but this will only start an RAS (Remote Access Services) session, and does
not start ActiveSync properly.