LXE vx3plus Reference Guide
14
Configuring the VX3Plus with LXEConnect
VX3Plus Reference Guide
E-EQ-VX3PLUSRG-A
Using LXEConnect
1. If an ActiveSync connection is has not been established, connect the VX3Plus to the PC.
Details on ActiveSync are included in the following section.
2. Double-click the LXEConnect icon that was created on the desktop.
3. LXEConnect launches.
Figure 1-7 LXEConnect Notice
4. Click the OK button to dismiss the About CERDisp dialog box. The dialog box
automatically times out and disappears after approximately 30 seconds.
Figure 1-8 LXEConnect Desktop
5. The VX3Plus can now be configured from the LXEConnect window. Input from the PC’s
mouse and keyboard are recognized as if they were attached to the VX3Plus.
6. When the remote session is completed, terminate the LXEConnect program by selecting File |
Exit or clicking on the X in the upper right hand corner to close the application then
disconnect the ActiveSync cable.
disconnect the ActiveSync cable.
Note: After using LXEConnect, the VX3Plus cannot go into Suspend mode until after a
warmboot. If using Power Management on an VX3Plus, always warmboot the VX3Plus
when finished using LXEConnect.
when finished using LXEConnect.