LXE vx3plus Reference Guide
18
ActiveSync
VX3Plus Reference Guide
E-EQ-VX3PLUSRG-A
Backup Data Files using ActiveSync
Use the following information to backup data files from the mobile device to a desktop or laptop
PC using the appropriate cables and Microsoft’s ActiveSync.
PC using the appropriate cables and Microsoft’s ActiveSync.
Prerequisites
A partnership between the mobile device and ActiveSync has been established. See section
“ActiveSync – Initial Setup”.
“ActiveSync – Initial Setup”.
Serial Port Transfer
• A desktop or laptop PC with an available serial port and a mobile device with a
serial port. The desktop or laptop PC must be running Windows NT or greater.
• Null modem cable with all control lines connected. LXE recommends using the null
modem cable part number listed in “Accessories”.
Infrared Port Transfer
• A desktop or laptop PC with an infrared port and a mobile device with an infrared
port. The desktop or laptop PC must be running Windows 98 SR2 or greater.
USB Transfer
• A desktop or laptop PC with an available USB port and a mobile device with a USB
port. The desktop or laptop PC must be running Windows 98 SR2 or greater.
• Use the LXE-specific USB cable as listed in “Accessories”.
Connect
Connect the modem cable to the PC (the host) and the mobile device (the client). Select “Connect”
from the Start Menu on the mobile device (Start | Programs | Communications | Connect).
from the Start Menu on the mobile device (Start | Programs | Communications | Connect).
Note:
Run “Connect” when the “Get Connected” wizard on the host PC is checking COM
ports to establish a connection for the first time.
ports to establish a connection for the first time.
Note:
USB synchronization will start automatically when the cable is connected, not requiring
you to select “Connect” from the Start menu.
you to select “Connect” from the Start menu.
Disconnect
Serial Connection
• Disconnect the cable from the mobile device.
• Put the mobile device into suspend by tapping the red Suspend button.
• Tap the status bar icon in the lower right hand corner of the status bar. Then tap the
• Put the mobile device into suspend by tapping the red Suspend button.
• Tap the status bar icon in the lower right hand corner of the status bar. Then tap the
Disconnect button.
USB Connection
• Disconnect the cable from the mobile device.
• Tap the status bar icon in the lower right hand corner of the status bar. Then tap the
• Tap the status bar icon in the lower right hand corner of the status bar. Then tap the
Disconnect button.
IMPORTANT – Do not put the mobile device into suspend while connected via USB. The device
will be unable to connect to the host PC when it resumes operation.
will be unable to connect to the host PC when it resumes operation.