LXE vx3plus Reference Guide
36 Hardware
Configuration
VX3Plus Reference Guide
E-EQ-VX3PLUSRG-A
Central Processing Unit
The CPU is an Intel Xscale PXA255 running at 400 MHz.
System Memory
A CF Card FLASH is used for ROM, Flash for Windows CE and Flash memory for bundled
applications. The Flash is configured as the primary boot device and contains the Windows CE
image, boot loader, OAL, applications, utilities and device drivers.
applications. The Flash is configured as the primary boot device and contains the Windows CE
image, boot loader, OAL, applications, utilities and device drivers.
Any flash remaining beyond the Windows CE image is formatted for use as a persistent memory
drive (which appears in My Computer as the folder “System”).
drive (which appears in My Computer as the folder “System”).
The computer has one Type II CF+ slot. The computer supports and auto detects up to 256MB of
Type I compact flash memory.
Type I compact flash memory.
Core Logic
The mobile device supports the following I/O components of the core logic:
• One PCMCIA slot (supports Type I or II PCMCIA cards).
• One compact Flash card slot.
• One Digitizer Input port (see section titled “Touchscreen”).
• Two I/O ports in the following combinations:
• One compact Flash card slot.
• One Digitizer Input port (see section titled “Touchscreen”).
• Two I/O ports in the following combinations:
o
one COM port, one USB-C connector)
o
two COM ports
o
one COM port, one USB-H connector
o
one USB-H connector, one USB-C connector.
Video Subsystem
The display has a 640 pixel (horizontal) by 240 pixel (vertical) format. The turn-off timing is
configured through the Control Panel. The display controller supports Windows CE graphics
modes. Touchscreen allows mouse functions (pointing and tapping on the display or Signature
Capture) using an LXE approved stylus.
configured through the Control Panel. The display controller supports Windows CE graphics
modes. Touchscreen allows mouse functions (pointing and tapping on the display or Signature
Capture) using an LXE approved stylus.
The active transmissive color display is optimized for indoor lighting. The active transflective
display is optimized for outdoor viewing.
display is optimized for outdoor viewing.
Power Supply
Vehicle power input for the VX3Plus is 12V to 80V DC nominal and is accepted without the need
to perform any manual operation within the VX3Plus.
to perform any manual operation within the VX3Plus.
Backup Battery
The LXE VX3Plus has a permanent lithium battery installed to maintain time and date. The
backup battery is not user serviceable and should last five years with normal use before it requires
replacement.
backup battery is not user serviceable and should last five years with normal use before it requires
replacement.
Note:
This battery should only be changed by authorized service personnel.