GE jx2127sh Installation Instruction
4
Installation Instructions
Place the top bracket on the top of the microwave
oven, with the tabs on the top and sides of the
bracket fitting squarely against the microwave oven.
oven, with the tabs on the top and sides of the
bracket fitting squarely against the microwave oven.
Drill pilot holes through the holes in the top
bracket. Attach the top bracket to the cabinet
using nine bronze round-head screws.
bracket. Attach the top bracket to the cabinet
using nine bronze round-head screws.
A
B
INSTALL THE TOP BRACKET
5
Tabs
Your trim kit is now fully installed. Replace any
loose items that were removed from the inside
of the microwave oven. Save or discard the extra
screws. Do not place them in the microwave oven.
loose items that were removed from the inside
of the microwave oven. Save or discard the extra
screws. Do not place them in the microwave oven.
Keep these installation instructions for future
reference.
reference.
Replace house fuse or close circuit breaker to
restore power at the service panel.
restore power at the service panel.
A
B
REPLACE ANY LOOSE ITEMS
7
164D3370P328
49-40398
49-40398
06-03 JR
Printed in Korea
C
Place the trim frame over the microwave oven.
Snap the two spring clips on the trim frame into
the slots on the top bracket.
the slots on the top bracket.
Open the microwave oven door. Secure the trim
frame using four flat-head screws (two on the
inside top and two on the inside bottom).
frame using four flat-head screws (two on the
inside top and two on the inside bottom).
A
C
INSTALL THE TRIM FRAME
6
B
Spring Clips
Slots
Flat-head screws
Tabs
Screws
Flat-head screws