GE zem200bf Installation Instruction
14
Finalize
under-cabinet
installation
under-cabinet
installation
Installation
Micr owav e Oven
• With template secured in place, check again
that hole center lines on Template 2 are
straight, and that distance from right to left
hole center measures distance shown on
template.
straight, and that distance from right to left
hole center measures distance shown on
template.
• Drill mounting holes:
– Use of safety glasses is recommended to
protect the eyes.
– Empty cabinet and remove delicate items
from adjacent cabinets.
– Use center punch or nail to make an
indentation for centering the drill bit.
– Holding drill straight, drill through
Template 2 at the four black drilling holes
indicated on template.
indicated on template.
– Remove template and clean drill holes.
• Select four bolts—one of each size—from
parts package.
• Hold each bolt against cabinet front rail.
• Select bolt that extends beyond top of
• Select bolt that extends beyond top of
bottom shelf by 3/16" to 3/4".
– Correct bolt length is important. If bolt is
– Correct bolt length is important. If bolt is
too short, it won’t reach oven; if bolt is too
long, oven will not be drawn up tight to
cabinet.
long, oven will not be drawn up tight to
cabinet.
• From inside cabinet, insert four bolts, all
same length, through mounting straps and
then into drilled holes of cabinet shelf.
then into drilled holes of cabinet shelf.
• Place solid support, such as a stack of books,
under oven to raise it close to cabinet
bottom.
bottom.
• Align mounting holes on oven with bolts.
• Lift oven, and insert bolts into mounting
• Lift oven, and insert bolts into mounting
holes.
• Tighten bolts alternately to draw oven up
evenly and secure it to cabinet bottom.
• Remove oven’s rubber feet and save for
future use.
• Plug power cord into receptacle.
Good Area
Top of Bottom Shelf
3/4"
3/16"
Front of Cabinet
Door
Bracket
Side of
Microwave