COP-USA cd260x-wdr Specification Guide

Menu and Operation 

       

  Press the “menu” button, then press “enter” for menu control options 

Under main menu mode, select 

ĀХ” or ĀЦ”.for sub-menu options. 

Select 

ĀЧ” or ĀШ” for submenu mode selection. 

          The blinking cursor will indicate that this category has been selected. 
     In the submenu, press “EXIT MENU” to return to the main menu. 
 

ˆ

ˆ

1. Under the OSD (On Screen Display), Select Lens to Manual

Ζ

ˆ

2. Adjust Brightness

μ80ν  (00 to FF) 

ˆ

3. Set Exposure-Wide Dynamic Range (WDR) ON

ˆ

4. Adjust back view exposure L

μ80ν(Long Exposure)    (00 to FF) 

ˆ

5. Adjust front view exposure S

μ80ν (Short Exposure)  (00 to FF) 

ˆ

6. Set Exposure-AGC(WDR) ON 

                                                                                                                           

LENS             DC-IRIS[80]    
EXPOSURE      SET      
IMAGE          SET        
AWB               

      SET               

DAY&NIGHT 

SET             

MOTION    

    SET             

PRIVATE   

SET 

       

SPECIAL      

SET       

EXIT 

               

Manual

SAVE/CANCEL

 

TV SYSTEM   

NTSC

PAL

IMAGE SENSOR   

COLOR 1/3-inch Dual Scan CCD Sensor   

CCD TOTAL PIXELS   

811(H) X 508(V)   

795(H) X 596(V)   

SCANNING SYSTEM   

525 lines, 60 fields/sec

625 lines, 50 fields/sec 

SYNC SYSTEM   

Internal / Line-Lock   

Legacy mode 

0. 5 Lux ( F1.2 , 5600ºK )   

MINIMUM

ILLUMINATION 

Star light Mode 

0.08 Lux ( F 1.2 , 5600ºK )   

LENS    

                                                                            2.5mm~ 9mm Lens 

RESOLUTION  

560 TVL  

WHITE BALANCE   

PUST/INDOOR/OUTDOOR/FLUO/USET/ATW 

GAIN CONTROL   

SELECTABLE BY OSD MANUAL 

S / N RATIO   

52dB ( MIN) / 60dB ( TYP ) (AGC OFF)   

AUTO IRIS   

A.E.S. / DC   

OSD DISPLAY   

ON SCREEN DISPLAY FOR ALL CONTROL   

WIDE DYNAMIC   

52dB ( MAX) (Required DC-IRIS lens)   

VIDEO OUTPUT   

Composite output 1.0V p-p at 75 ohm   

GAMMA CORRECTION   

0.45 / 1.0 (SELECTABLE BY OSD MANUAL)   

OPERATION TEMPERATURE   

-20 º C TO 50 º C 

OPERATIONAL HUMIDITY   

within 85 % RH   

POWER SUPPLY