Ricoh c410dn Software Guide

Monitoring and Configuring the Printer

232

Error at Printer: Red LED

An error has occurred.

Error in Printer

An error has occurred.

Error: Address Book

An error has occurred in the data of the ad-
dress book.

Error: Command Transmission

An error has occurred in the printer.

Error: DIMM Value

A memory error occurred.

Error: Ethernet Board

An Ethernet board error has occurred.

Error: HDD Board

A hard disk drive board error has occurred.

Error: Memory Switch

A memory switch error has occurred.

Error: Optional Font

An error has occurred in the font file of the printer.

Error: Optional RAM

An error has occurred in the optional memory unit.

Error: Parallel I/F Board

An error has occurred in the parallel interface.

Error: PDL

An error has occurred in the page description 
language.

Error: USB Interface

An error has occurred in the USB interface.

Error: Wireless Card

Wireless card is not inserted during start up, 
or the IEEE 802.11b interface unit or the wire-
less card is taken out after start up.

Exceed Booklet Stapling Limit

The printing has exceeded the stapling limit of 
the booklet finisher.

Full: Finisher

Finisher tray is full.

Full: Finisher Shift Tray

Shift tray of Finisher is full.

Full: Finisher Shift Tray 1, 2

The shift tray 1 and 2 of Finisher are full.

Full: Finisher Upper Tray

The upper tray of Finisher is full.

Full: Hole Punch Receptacle

Punch Chip receptacle for hole punch is full.

Full: Waste Toner

Waste toner is full.

Hex Dump Mode

It is a hex dump mode.

Immed. Trans. not connected

It did not connect directly with the other party 
of the transmission.

Immediate Transmission Failed

An error has occurred while transmitting directly.

In Use: Copier

The copier is being used.

In Use: Fax

The fax is being used.

In Use: Finisher

Other functions is using Finisher.

In Use: Input Tray

Other functions is using the input tray.

In Use: Staple Unit

Other functions is using the staple unit.

Independent-supplier Toner

Toner that is not recommended is set.

Key Card not inserted

The printer is waiting for key card to be inserted.