Ricoh fax3900l User Guide
Memory Transmission and Immediate Transmission
13
2
G
Press the {
OK
} key to enter anoth-
er fax number.
Dest.2 OK to Add
9876543210_kkkkkkkkk
Note
❒ Repeat steps
F and G until all
destinations are entered.
❒ If you enter only one destina-
tion, press the {
Start
} key.
❒ The machine stores your mes-
sage and dials the first number
(or, if you selected Send Later, it
will return to standby mode and
the fax document will be sent at
the time that you selected).
(or, if you selected Send Later, it
will return to standby mode and
the fax document will be sent at
the time that you selected).
H
Press the {
Start
} key.
The machine dials the other party's
number.
number.
0123456789
File No.001 P.001
Note
❒ If the other party's line is busy,
your machine will redial.
❒ If the other party's fax machine an-
swers, both machines connect and
your machine sends the document.
The other party's Own Name or Own
Fax Number appears on the upper line.
your machine sends the document.
The other party's Own Name or Own
Fax Number appears on the upper line.
❒ If your line goes through a local switch-
board (a PBX) remember to dial the exit
code. Press the {
code. Press the {
Pause
} key immediate-
ly after the code. If the number includes
a country code, press the {
a country code, press the {
Pause
} key
after the country code, and then dial
the rest of the number. Pauses are dis-
played as a dash (-) on the display.
the rest of the number. Pauses are dis-
played as a dash (-) on the display.
The File number. is used for managing
documents in memory, and is required
when canceling transmission of a doc-
ument or printing out its contents.
documents in memory, and is required
when canceling transmission of a doc-
ument or printing out its contents.
Canceling a Memory
Transmission
Transmission
Before the
{
Start
}
key is pressed
A
Press the {
Stop
} key or {
Clear
Modes
} key, or remove the docu-
ment set in the feeder.
While the document is being scanned in
A
Press the {
Stop
} key.
All parts of the document that
have been scanned in are cleared.
Confirm and press the {
have been scanned in are cleared.
Confirm and press the {
OK
} key.
During transmission
A
Confirm the destination.
The destination name or fax num-
ber for the current transmission is
displayed.
The destination name or fax num-
ber for the current transmission is
displayed.
B
Press the {
Stop
} key.
Cancel Trans.? hi/OK
[Yes] No
C
Confirm and press the {
OK
} key.
Transmission is canceled.
Smt4EN-BasicNIC-F_FM.book Page 13 Thursday, September 14, 2000 7:56 PM