Ricoh ap900 Software Guide
Appendix
299
For details about the displayed items and selectable items, see Web Image
Monitor Help.
Monitor Help.
G
Click [OK].
[Installed] appears under [Certificate Status] to show that a server certificate for
the printer has been installed.
the printer has been installed.
H
Log off from the printer.
Enabling SSL
After installing the server certificate in the printer, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
tificate authority.
A
Open a Web browser.
B
Enter “http://(printer's-address)/” in the address bar to access the print-
er.
er.
C
Log on to the printer.
The network administrator can log on.
Enter the login user name and login password.
D
Click [Cancel], then click [Security], and then click [SSL/TLS].
The [SSL/TLS] page appears.
E
Click [Enable] for [SSL/TLS].
F
Click [Apply].
The SSL setting is enabled.
G
Log off from the printer.
❒ If you set [Permit SSL/TLS Communication] to [Ciphertext Only], enter “ht-
tps://(printer's address)/” to access the printer.
User Settings for SSL (Secure Sockets Layer)
If you have installed a server certificate and enabled SSL (Secure Sockets Lay-
er), you need to install the certificate on the user’s computer.
er), you need to install the certificate on the user’s computer.
The network administrator must explain the procedure for installing the certifi-
cate to users.
cate to users.
If a warning dialog box appears while accessing the machine using the Web
browser or IPP, start the Certificate Import Wizard and install a certificate.
browser or IPP, start the Certificate Import Wizard and install a certificate.