Electrovoice sxa360 User Manual
ELECTRO-VOICE
®
SxA360 Owners Manual
Sx
A
360
5
Setup Diagrams for SxA360
· Plug a line input into either the ¼-inch or the 3-pin XLR-type input connector. Examples of line
input sources are mixer outputs, CD/DVD players, cassette decks, VCRs, electronic keyboards,
computer sound cards, etc. The ¼- inch input is in the center of the XLR connector and can
accept unbalanced or balanced lines (TRS ¼-inch). The line input level required to drive the unit
to full power is from – 12 dBu to 0 dBu. The system’s level control regulates the overall output
level of the system.
computer sound cards, etc. The ¼- inch input is in the center of the XLR connector and can
accept unbalanced or balanced lines (TRS ¼-inch). The line input level required to drive the unit
to full power is from – 12 dBu to 0 dBu. The system’s level control regulates the overall output
level of the system.
Figure 1:
Rear Panel SxA360
Level adjustment knob shown
in place. Unit is shipped pre-
set at 0 dB without knob
installed (knob is shipped
separately with your SxA360).
If knob is not used, please
remember where you store it.
Customer can adjust level by
removing cover, pressing
knob in place, and rotating to
desired level.
in place. Unit is shipped pre-
set at 0 dB without knob
installed (knob is shipped
separately with your SxA360).
If knob is not used, please
remember where you store it.
Customer can adjust level by
removing cover, pressing
knob in place, and rotating to
desired level.