Haier hbs82-880 User Manual

Page of 17
13
Trouble  shooting
The following circumstances do not constitute problems. Do not contact the main-
tenance service until the problem has been confirmed.
Problem
Possible Cause
  
Poor connection to power supply
  
Power failure
  
Door is not properly closed
  
Machine has not been switched on
Washing machine does not fill
with water
  
Water is not turned on
  
Water pressure is less than 0.05MPa
  
The inlet hose is kinked
  
Water supply failure
  
The program knob is not properly set
  
The door is not properly closed
The water supply and
drainage do not stop
 
Check that the height of the water hose is below
      80cm
Drainage failure
 
Drainage hose is blocked
 
Drainage hose end is below 100cm above the
      floor level
Excessive foam in the drum
 
The detergent is not a low foam type
     Excessive detergent has been used
Operation stops before completion
of the wash cycle
 
 Water or electricity failure
Strong vibration during spin
Some packing fixing bolts removed
  
Washing machine on a uneven surface
The washing machine fails to operate
13