Haier hw-b1060 User Manual

Functions

Preparation

1.Power supply

Plug in the power supply 220-230V~/50HZ

2.Water supply

Turn on the tap ensure that the water in clear.

Caution:Before staring the washing machine turn on the water

faucet to ensure the water faucet and the water inlet hose are

connected correctly and do not leak.

4.Detergent selection

Only special low foam detergent should

be used in automatic drum washing

mashine,form blended or wool fabrics

special deter-gent should ne used.dry

clearning solvent should not be used

such as trichhloroethy-lene or alike

(caution :load the required amount of

detergent only).

3.Laundry treatment

Sort out clothes according to type and extent of dirt.There are

three types of clothes:cotton,synthetical and woolen (silk) fabrics.

Separate white clothes from colored.If whites and coloreds

are combimed for one load,make sure the coloreds are colorfast.

-Clothing with frayed edges or yams should be put in a wash

bag or special bag before washing.

-repair damged clothing,lose buttons or damaged zips

and hooks before washing.

-Bed sheets and table ware should be loosely loaded and not

folded.

This washing mashine is for househould use and designed

for mechanically washable clothes.When washing,separate

unwashable clothes with reference to clothes labels.

Note.

If Program key is turned after reservation time is set and before program starts, the

reservation will be automatically cancelled.

When reservation feature is activated, the washing start time is fixed. There will be some

difference between the reserved time and the actual program completion time due to different
water inlet time and load distribution condition during spin

dry process.

E. LCD

LCD is a window to display information including washing status, washing progress,

reservation time, remaining time, heating temperature, spin

dry speed, load selection and error etc.

as well as to display additional features such as power clean, super clean rinse and foaming
auto

check etc.

F. Start/Pause Key

When the washer is energized, select the desired washing program and press the Start/Paus

key. The indicator lamp on the upper left corner of the key will illuminate to indicate that the

washer has started operation. If it needs to pause the washing process, simply press the Start/

Pause key and the indicator lamp and remining time display will blink and the washer enters into

condition. Press the Start/Pause key again to resume washing process.

(Note: Press the Start/Pause key only after the desired program and feature are set.

G. Power Clean Key

Press the key to increasewashing time of current program selected. This feature is appropriate

for washing heavily

soiled clothes. The Power Clean icon in the LCD will illuminate after the

feature is selected. (This feature is not available in certain programs .Please refer to Program

Setting Guidance Table for details.)

H. Temperature Selection Key

Press the key and LCD will display the selected heating temperature, which is adjustable as

needed. Note: 20

C means cold water washing and no heating is involved.

Spin Speed Selection Key

Press the key and LCD will display the selected spin

dry revolution speed, which is adjustable

as needed. (When No Spin

dry feature is selected, the time will decrease correspondingly

Load Selection key

Turn the Program Knob to select the desired program (see Program Setting Guidance Table)

Press the key and manually select different programs and power-saving and water-seaving fea-

ture based on the volume of load. LCD will display L-1(2,3,4,5), indicating the washing load is 1

(2,3,4,5) kg and program time will change accordingly. (The feature is not

available in Wool,

Cashmere, Silk, Speedy, Drainage Only and Spin Only Program. Only L

–

1, 2, 3 are available for

Chemical Fiber program. )