Haier hwm80-113s User Guide

Ï ´ º ó ´ ¦ À í

13

After using,  please clean the lint and foreign materials of the lint filter and 
overflow filter in time.  Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.

1

Take off the overflow filter.

      As indicated in the figure, nip the elastic fixing 
      claw and pull it to the direction of the arrow to 
      take it off.

Too much lint on the overflow filter will influence 
the  normal  usage of  the  machine.  Please 
clean it every two months.

Elastic fixing

claw

Figure 2

Figure 3

Figure 1

1. Take off the lint filter
    Put hand at the indicated position.
    Push down to take it off. ( See to  
    Figure 1)

2. Clean the lint
    Put it in water and clean while it is
    still wet.(See to Figure 2)

3. Install the lint filter
    After  cleaning,  insert  the  bottom
    of   the  lint  filter  ( marked   with
    "down side") into the overflow filter , 
    then  push  the upper  part  of  the 
    filter in  ( marked  with  " up side "). 
    (See to Figure 3)

The lint filter must be used during washing.
It must be cleaned in time after each using. 

Disposal after washing