Haier ri552ff User Manual

Preparation

_ìáäíJáå=áåëí~ää~íáçå

1. Ensure that the doors of the kitchen unit and the

refrigerator are of the same opening direction. (Take

the right-opening door as an example)

2. Fix the joint sockets to the freezer and refrigerator

doors with the provided screws (Figure 1).

3. Move the refrigerator into the kitchen unit,

ensuring the left side panel of the refrigerator as

close as possible to the wall. (Figure 2)

4. Insert the connecting pad into the joint socket

and then fix the connecting pad on the door of the

kitchen unit with a margin of 20-22mm. (Figure 3)

5. Properly place the refrigerator with a 3-4mm

space between the left side to the wall, ensuring

that the doors of the refrigerator and the kitchen

unit can be easily opened and closed, and the

connecting pad is correctly settled in the joint

socket.

6. Fix the upper and lower stiffeners to the upper

connection and base panel. The screw holes shall

be plugged with the plastic stoppers. (Figure 4)

7. Fill the left gap of the kitchen unit with the gasket.

(Figure 5)

8. Remove the screws and the hole stoppers on the

left of the middle connection, and fix the connecting

pivot to the refrigerator with one end in the hole

which was plugged by the stopper and the other

end to the inside wall of the kitchen unit. (Figure 6)

gçáåí=ëçÅâÉí

cáÖìêÉ=N

OMúOOãã

`çååÉÅíáåÖ=é~Ç

cáÖìêÉ=P

cáÖìêÉ=O

mä~ëíáÅ=ëíçééÉê

Çççê=Ö~ëâÉí

cáÖìêÉ=Q

cáÖìêÉ=R

cáÖìêÉ=S