Frigidaire FARE1011MW User Manual

13

Use the drying rack for items which should not be tumble 

dried. Insert the rack into the dryer drum, resting the 

back support on the moisture sensor bars and the front 

legs on the air grill.
Place items to be dried on top of the rack, leaving space 

between items and not allowing them to hang over the 

sides or through the holes. The weight should not exceed 

10 lbs (4.5 kg). Select the air dry (no heat) setting for 

items containing plastic, foam rubber, rubber-like materi-

als, feathers or down.
When items are dry, remove the rack and store it in a 

convenient location.

Í

For step-by-step instructions on DOOR REVERSAL, refer to 

the 

Installation Instructions supplied with this dryer.

Í

If your model did not come supplied from the factory 

with a drying rack you may order one.

The initial drying time will be displayed for about 5 min-

utes after the start of a cycle. Then in auto dry cycles, 

the estimated drying time begins automatic time calcu-

lation throughout the cycle by the moisture sensors (if 

equipped). Timed dry cycles continue with actual time 

remaining.
Status Lights

The following indicators may be lighted during the cycle:

• clean lint fi lter

• drying

• cool down

• wrinkle release

• done

The drum light will come on whenever the door is opened 

to illuminate the drum during loading and unloading. 

Closing the door turns off the light.
Reversible Door

Your dryer is equipped with a reversible door. The door 

can be hinged on the right or left side.

moisture sens-

ing bars

rear 

support

front 

legs